Installation Guide

The other stationary glass is install in same way.
8.3.Install hanging aluminum(09)
Place the hanging aluminum to the upper guide track through the gap of the
sliding space, then push it into the top of the stationary glass to make them
touch tightly.
Please see Fig 16 for details.
Fig 16
9.Install moving glass (28)
Place moving glass(28) to the inner track of upper guide track tipsily and then
make it vertical slowly, rise up the upper side of the glass and let the bottom
side go into the bottom guide block.when upper and bottom glass is totally in a
vertical line,then insert the pulley wheel sheath to the sloth of the moving glass
upper profile.
Please see Fig 17 for details
Fig 17
Important note: please be sure the side which to be pushed into the sloth of
vertical profile is the side with U-shape strip.