User manual

The model and serial number of the disk serve as the title of the browsed page. The disk layout is shown in form of a

circular graph, where the color of a sector corresponds to a file system of an appropriate partition. On the right you may

see a table, which contains the following information:

• Type of hard disk (basic or dynamic),

• Total size (in GB),

• Information on geometry of the disk (amount of sectors per track, heads and cylinders).

Below there is a list of available wizards. If you click a corresponding record the appropriate wizard will be started. All

default values for the operation parameters will correspond to the disk’s settings. The list of wizards contains a detailed

description of tasks that can be performed by the wizard. This nullifies the possibility of selecting the wrong wizard.

When you select a small-sized bar (i.e. corresponding to a logical disk) the Explorer Bar will display information on it as

well. The page title will contain a drive letter, which is assigned to the disk. The disk layout graph will be colored in

accordance with the volume ratio of the used space to the free space (the light colored sector). The table on the right

will contain the following information: