User manual

Many people believe the misconception that repartitioning a disk will result in complete destruction of its contents.

Actually that is not quite so. Repartitioning the drive only alters references to partitions in the Partition Table, leaving all

file data intact. In fact, there are a number of programs available to successfully recover previously deleted partitions.

Formatting a drive also does not guarantee data destruction. Formatting procedure implies modification of the Master

File Table (MFT) that keeps track of where file contents are stored on the disk and verification of each sector for

consistency. Even a low-level format does not actually erase the file contents for good, since they can still be

resurrected from their deleted state with minimal effort by using the popular today Magnetic Force Microscopy

technology.

The only way to make sure that all the data has been erased from a hard drive is to overwrite all on-disk sectors with

random patterns of ones and zeros. Although this sounds complex, there is an easy way to do this.

The process of deliberately, irreversibly removing or destroying the data stored on a memory device (magnetic disks,

flash memory drives, etc.) is generally known as Data Sanitization. A device that has been sanitized has no usable

residual data and even advanced forensic tools should not ever be able to recover it, thus providing maximum level of

security.

Scheduling

The automation of operations is particularly effective when you have to repeat a sequence of actions on a regular basis.

For example, developing a specific project on a day-to-day basis and having to make a backup every evening so as not to

lose the valuable data, you will really appreciate, when this kind of routine operations will be carried out automatically

without your participation.

Another aspect of any automation process is that it allows an optimization of your computer’s work-load. This is

especially important when operations require a considerable amount of computer resources – processor time, memory

and more. A number of tasks, which can decrease the performance, can be run during the night or whenever the

computer has the least work-load to perform.

The program has a special tool for scheduling. You can set out a timetable for any operation and it will start at a

specified time without interrupting your current activity.

Windows Components

In the given section you can find all the information necessary to successfully work with the Windows version of the

product.

Interface Overview

This chapter introduces the graphical interface of the program. The design of the interface precludes any mistake being

made on the part of the user. Most operations are performed through the system of wizards. Buttons and menus are

accompanied by easy understandable icons. Nevertheless, any problems that might occur while managing the program

can be tackled by reading this very chapter.

General Layout

When you start the program, the first component that is displayed is called the Launcher. It enables to run wizards and

dialogs, to specify program settings, to visualize the operating environment and the hard disk configuration.

The Launcher’s window can be conditionally subdivided into several sections that differ in their purpose and

functionality: