User manual

132

• Call the popup menu for the selected partition (right click of the mouse button) on the Disk Map or on the

Partition List, then select the menu item: Downgrade NTFS Version…

3. Decrease version of the selected NTFS partition by selecting the one you need from the pull-down list.

4. The operation will be performed immediately after confirmation.

Mount Archive

The program provides the ability to assign a drive letter to a partition backup image. As a result of the operation you will

get a new read-only partition in the system to easily browse through its contents and copy the required information

even with the standard Windows tools.

Assign Drive Letter

In order to mount an archive you should take the following steps:

Launcher

1. Select a backup image in the Archive Database.

2. Call the Mount Archive dialog to set up the operation. There are several ways to do it:

- Select in the Main Menu: Archives > Mount the Selected Archive.

- On the Explorer bar: select the Mount Archive item.

- Call the popup menu for the selected image (right click of the mouse button), then select the menu item:

Mount the Selected Archive…

3. Specify a drive letter for the selected backup image. Initially the program suggests some consistent value for this

parameter. So you may just press the Yes button to confirm the operation.

However you can manually define the required letter by selecting it from the pull-down list of available drive

letters.

4. The operation will be performed immediately after confirmation.