User manual

 Call the popup menu for the selected partition (right click of the mouse button) on the Disk Map or on the

Partition List, then select the menu item: Downgrade NTFS Version…

3. Decrease version of the selected NTFS partition by selecting the one you need from the pull-down list.

4. The operation will be performed immediately after confirmation.

Test Surface

The program enables to test surface of existing partitions and blocks of free space for bad or unstable sectors. If found

any it automatically marks them unusable in the file system metadata, thus minimizing the risk of data loss.

In order to start the surface test you should take the following steps:

Launcher

1. Select a partition or a block of free space on the Disk Map.

2. Call the Test Surface dialog to set up the operation. There are several ways to do it:

- Select in the Main Menu: Partition > Test Surface…

- Call the popup menu for the selected partition (right click of the mouse button) on the Disk Map, then select

the menu item: Test Surface…

3. From the pull-down list choose the level of the surface check.

4. The operation will be performed immediately after confirmation.

Check File System Integrity

The program allows you to check integrity of a file system. It can be used to detect possible file system errors before

performing any operation on a partition.

To start the system integrity check you should take the following steps:

Launcher