User manual

 Free space before. Define the partition position (in Mb) relative to the beginning of the available range of

disk space.

 Free space after. Define the amount of trailing free space (in Mb) at the end of the available range of disk

space.

 Sector to sector move. Mark the checkbox to move the partition in the sector-by-sector mode to process its

unused space as well. This can help to avoid problems with hidden data created by certain applications or

the system administrator. However, it will take more time to accomplish the operation.

Partition size and position may also be defined by using the drag-and-drop technique. To do

that, just carry out the required operation on the Disk Map. The virtual operations are to be

available.

When resizing a FAT16 partition beyond the 2GB limit (maximum file system size), the

partition will automatically be converted to FAT32.

The program enables to enlarge NTFS partitions (system, locked) without rebooting

Windows and interrupting its work, providing 100 percent guarantee that your data is kept

intact.

4. The operation will be performed immediately after confirmation.

Available operation scenarios:

 Increasing size of a system partition by taking unused space from any other

 Shrinking a system partition to increase size of a data partition

Converting File System

With our program you can change type of the used file system without destroying its data. While performing the

operation, it first checks the current file system for consistency and then verifies whether the on-partition data meet the

requirements of the desired file system or not. After having passed the testing, the program re-organizes the file system

metadata and user files.

The program enables to convert the following file system types:

- FAT16 > NTFS, FAT32

- FAT32 > NTFS, FAT16

- NTFS > FAT16, FAT32

- Ext2 > Ext3

In order to convert a file system you should take the following steps:

Launcher

1. Select a partition on the Disk Map.

2. Call the Convert File System of Partition dialog to set up the operation. There are several ways to do it: