User manual

158

Hiding of the system partition will make OS non-bootable, what is quite normal.

9. Apply all introduced changes. By default, our program works in the virtual mode of execution, so you have to

confirm all operations to let the program accomplish them. To do that, just click the Apply button on the Virtual

Operations Bar.

10. The program will require the system restart to accomplish the operation in a special boot-up mode. Click the

appropriate button to agree.

After all the operations are completed you will not be able to restart the system, what is

quite normal. Nevertheless if you do try it, the following error will occur:

All the mentioned above operations can also be accomplished with the WinPE recovery

environment.

11. Install Windows XP on the newly created partition. We won’t go into details as for its installation, as you can find

all the necessary information in documentation that comes with the product. However to avoid any problems,

we consider it necessary to draw your attention on the following issues:

- You need a bootable distributive CD of Windows XP to install it;

- To automatically start your computer from this CD, make sure the on-board BIOS is set up to boot from CD first

or press F12 during startup to select a bootable device;

- Do not forget to select the newly created partition as destination.