User manual

125

12. After completing the operation close the wizard, and then reboot the computer.

Copying of data from the corrupted system disk to another hard disk

To retrieve valuable information from your hard disk and copy it to another hard disk when the system fails to boot,

please do the following:

1. Connect the second hard disk to the computer.

2. Start up the computer from our Linux/DOS recovery media.

Recovery Media Builder can help you prepare the Linux/DOS or WinPE recovery

environment either on a CD/DVD disc or a thumb drive.

To automatically boot from the recovery media please make sure the on-board BIOS is set

up to boot from CD/USB first.

3. In the boot menu select Normal Mode to use the Linux recovery environment (more preferable) or Safe Mode

to use the PTS DOS recovery environment (in case you’ve got problems with Linux). Moreover you’ve got the

option to boot into the Low-Graphics Safe Mode (PTS DOS safe mode) to cope with a serious hardware

incompatibility. In this case, only the minimal set of drivers will be included, like hard disk, monitor, and

keyboard drivers. This mode has simple graphics and a simple menu.