Modem User's Guide
Table Of Contents
- Contents
- Warranty, Sales, and Service Information
- About This Guide
- About the Model 7986 Standalone Termination Unit
- Using the Asynchronous Terminal Interface
- Initial Startup and Configuration
- Monitoring the Unit
- Testing
- Messages and Troubleshooting
- Security
- IP Addressing
- Configuration Option Tables
- Standards Compliance for SNMP Traps
- Cables and Pin Assignments
- Technical Specifications
- Glossary
- Index
Configuration Option Tables
A-13
7986-A2-GB20-00
September 1998
Communication Protocol Options
The communication protocol configuration options specify the information
necessary to support the IP communication network, including; IP address and
link protocols. Initial values are determined by the configuration you currently
have loaded. To access the Communication Protocol Options screen, follow this
menu selection sequence:
Main Menu
→
Configuration
→
Load Configuration From
→
Management and Communication
→
Comm Protocol Options
main/config/management/communication Hotwire
Model: 7986
COMMUNICATION PROTOCOL OPTIONS
Node IP Address: 000
.000.000.000 Clear
Node Subnet Mask: 000
.000.000.000 Clear
Default Network Destination: None
Communication Port
IP Address: 000
.000.000.000 Clear
Subnet Mask: 000
.000.000.000 Clear
Link Protocol: PPP
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit