Modem User's Guide
Table Of Contents
- Contents
- Warranty, Sales, and Service Information
- About This Guide
- About the Model 7986 Standalone Termination Unit
- Using the Asynchronous Terminal Interface
- Initial Startup and Configuration
- Monitoring the Unit
- Testing
- Messages and Troubleshooting
- Security
- IP Addressing
- Configuration Option Tables
- Standards Compliance for SNMP Traps
- Cables and Pin Assignments
- Technical Specifications
- Glossary
- Index
A-1
7986-A2-GB20-00
September 1998
Configuration Option Tables
A
Overview
The tables in this appendix summarize the configuration options accessed when
you select the Configuration option on the Main Menu. The Configuration options
are arranged into groups based upon functionality.
Select . . .
To Access the . . . To Configure the . . .
Network Network Interface Options, Table A-1 E1 HDSL network interface
Ports.
G.703 Interface G.703 Interface Options,
Table A-2
G.703 interface port.
System System Options, Table A-3 General system options of
the unit.
Communication
Port
Communication Port Options, Table A-4 Unit’s COM port options.
Management
and
Communication
H Telnet Sessions Options,
Table A-5
H Communication Protocol Options,
Table A-6
H SNMP Trap Options, Table A-7
Management support of the
unit through SNMP and
Telnet.
NOTE:
All changes to configuration options must be saved. Refer to
Saving
Configuration Options
in Chapter 3,
Initial Startup and Configuration
.