Modem User's Guide
Table Of Contents
- Contents
- Warranty, Sales, and Service Information
- About This Guide
- About the Model 7986 Standalone Termination Unit
- Using the Asynchronous Terminal Interface
- Initial Startup and Configuration
- Monitoring the Unit
- Testing
- Messages and Troubleshooting
- Security
- IP Addressing
- Configuration Option Tables
- Standards Compliance for SNMP Traps
- Cables and Pin Assignments
- Technical Specifications
- Glossary
- Index

Messages and Troubleshooting
6-4
7986-A2-GB20-00
September 1998
Table 6-1. Device Messages (2 of 2)
Device Message What To DoWhat Message Indicates
Invalid entry at cursor
(1...223, excluding
127)
Invalid range. Enter a value within the IP
address range.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
1. Delete another login/password
combination.
2. Reenter the new login ID.
No Security Records
to Delete
Delete was selected from
the Administer Login
screen, and no security
records had been defined.
H No action needed.
H Enter a security record.
Password Matching
Error – Re-enter
Password
Password entered in the
Reenter Password field of
the Administer Logins
screen does not match
what was entered in the
Password field.
H Try again.
H Contact your system
administrator to verify your
password.
Please Wait Command takes longer
than 5 seconds.
Wait until message clears.
Test Active A test is running and no
higher priority health and
status messages exist.
H Contact service provider if test
initiated by the network.
H Wait until the other test ends
and message clears.
H Cancel all tests from the Test
screen.
H Stop the test from the same
screen the test was started
from.
0.0.0.0 is an invalid
IP address
An IP address of all zeroes
was entered.
Enter a valid, non-zero IP
address.










