User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index
5-1
9783-A2-GB20-00
July 2000
Security and Logins
5
This chapter includes the following:
H
Limiting Access
H
Controlling Asynchronous Terminal Access
H
Controlling External COM Port Device Access
H
Controlling Telnet or FTP Access
—
Limiting Telnet Access
—
Limiting FTP Access
—
Limiting Telnet or FTP Access Over the TS Management Link
H
Controlling SNMP Access
—
Disabling SNMP Access
—
Assigning SNMP Community Names and Access Levels
—
Limiting SNMP Access Through IP Addresses
H
Creating a Login
H
Modifying a Login
H
Deleting a Login