User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index

Configuration Options
4-7
9783-A2-GB20-00
July 2000
Configuration Option Tables
Configuration option descriptions contained in this chapter are in menu order,
even though this may not be the order in which you access each when
configuring the unit.
The following configuration option tables are included:
H Table 4-2. System Frame Relay and LMI Options
H Table 4-3. Service Level Verification Options
H Table 4-4. General System Options
H Table 4-5. Network Physical Interface Options
H Table 4-6. Data Port Physical Interface Options
H Table 4-7. Data Port Frame Relay Options
H Table 4-8. Network ATM Options
H Table 4-9. DLCI Record Options
H Table 4-10. PVC Connection Options
H Table 4-11. Node IP Options
H Table 4-12. Management PVC Options
H Table 4-13. General SNMP Management Options
H Table 4-14. Telnet and FTP Session Options
H Table 4-15. SNMP NMS Security Options
H Table 4-16. SNMP Traps Options
H Table 4-17. Ethernet Port Options
H Table 4-18. Communication Port Options
H Table 4-19. External Modem (COM Port) Options
Configuring the Overall System
The System menu includes the following:
H Frame Relay and LMI
H Service Level Verification
H General