User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index

About the FrameSaver DSL Unit
1-11
9783-A2-GB20-00
July 2000
OpenLane SLM System
Being standards-based, the OpenLane SLM (Service Level Management)
system can be used with other management applications like HP OpenView or
IBM’s NetView. OpenLane includes HP OpenView adapters for integrating
OpenLane features with the OpenView Web interface.
Being Web-based, the OpenLane system provides Web access to the data
contained in the database to provide anytime, anywhere access to this
information via a Web browser.
Some of the OpenLane system’s features include:
H Real-time performance graphs provide exact performance measurement
details (not averages, which can skew performance results) of service level
agreement (SLA) parameters.
H Historical SLV graphs provide service level management historical reports so
frame relay SLAs can be verified.
H Diagnostic troubleshooting provides an easy-to-use tool for performing tests,
which include end-to-end, PVC loopback, connectivity, and physical interface
tests.
H Basic configuration allows you to configure FrameSaver devices, and set
RMON alarms and thresholds. Network DLCI Circuit IDs can also be
assigned.
H Automatic SLV device and PVC discovery allows all SLV devices with their
SLV Delivery Ratio configuration option enabled to be discovered
automatically, along with their PVCs.
H A FrameSaver unit can be reset from the OpenLane system.
H Firmware downloading provides an easy-to-use tool for downloading to an
entire network or a portion of the network.
H On-demand polling of FrameSaver devices, and SNMP polling and reporting
are available.
H Configuration of circuits across the Hotwire GranDSLAM and endpoint for
easy provisioning by the DSL router.