User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index
SNMP MIBs and Traps, and RMON Alarm Defaults
B-2
9783-A2-GB20-00July 2000
MIB Support
The FrameSaver unit supports the SNMP Version 1, and has the capability of
being managed by any industry-standard SNMP manager and accessed by
external SNMP managers using the SNMP protocol.
The following MIBs are supported:
H MIB II (RFC 1213 and RFC 1573)
H Frame Relay DTEs MIB (RFC 2115)
H RS-232-Like MIB (RFC 1659)
H Frame Relay Service MIB (RFC 1604)
H Enterprise MIB
H RMON Version 1 MIB (RFC 1757)
H RMON Version 2 MIB (RFC 2021)
Downloading MIBs and SNMP Traps
Paradyne standard and enterprise MIBs are available from the Paradyne World
Wide Web site.
" Procedure
To access Paradyne MIBs:
1. Access the Paradyne World Wide Web site at www.paradyne.com.
2. Select Technical Support.
3. Select Management Information Base (MIBs).
The download procedure may vary depending upon your browser or NMS
application software. Refer to your browser or NMS manual for additional
download information.