User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index

Menu Hierarchy
A-3
9783-A2-GB20-00
July 2000
00-16771b
MAIN MENU
Status
Test
Configuration
Control
Easy Install
System Information
• Device Name
• System Name,
Location, Contact
• Date
• Time
Control
System Information
Administer Logins
Change Operating Mode
Select Software Release
LMI Packet Capture Utility
Clear Device Fail
Reset Device
Administer Logins
• Login ID
• Password
• Access Level
New
Login Entry
Select Software Release
• Current Release
• Alternate Release
• Switch & Reset
LMI Trace Log
LMI Packet Capture Utility
• Capture Interface
• Packet Capture Start/Stop
• Status
• Packets in Buffer
• Display LMI Trace Log
MAIN MENU
Status
Test
Configuration
Control
Easy Install
Easy Install
• Node IP Address and Subnet Mask
• TS Access
• Create Dedicated Network Management Link
• Ethernet Port Options Screen
• DSL Line Rate