User's Manual
Table Of Contents
- Contents
- About This Guide
- About the FrameSaver DSL Unit
- User Interface and Basic Operation
- Configuration Procedures
- Configuration Options
- Overview
- Using the Easy Install Feature
- Setting Up So the Router Can Receive RIP
- Entering System Information and Setting the System Clock
- Configuration Option Tables
- Configuring the Overall System
- Configuring the Physical Interfaces
- Configuring Frame Relay for the Data Port
- Configuring ATM for the Network Interface
- Configuring Circuit and DLCI Records
- Configuring PVC Connections
- Setting Up Management and Communication Options
- Configuring Node IP Information
- Configuring Management PVCs
- Configuring General SNMP Management
- Configuring Telnet and/or FTP Session Support
- Configuring SNMP NMS Security
- Configuring SNMP Traps
- Configuring the Ethernet Port
- Configuring the Communication Port
- Configuring the COM Port to Support an External Modem
- Security and Logins
- Operation and Maintenance
- FTP Operation
- Troubleshooting
- Setting Up OpenLane for FrameSaver Devices
- Setting Up Network Health for FrameSaver Devices
- Menu Hierarchy
- SNMP MIBs and Traps, and RMON Alarm Defaults
- Connectors, Cables, and Pin Assignments
- Technical Specifications
- Equipment List
- Index
About This Guide
x
9783-A2-GB20-00
July 2000
Conventions Used
Convention Used When Used
Italic
To indicate variable information (e.g.,
DLCI
nnnn
)
.
Menu selection sequence
To provide an abbreviated method for indicating
the selections to be made from a menu or
selections from within a menu before
performing a procedural step.
For example,
Main Menu
→
Status
→
System and Test Status
indicates that you should select Status from the
Main Menu, then select System and Test Status
from the Status menu).
(Path:) To provide a check point that coincides with the
menu path shown at the top of the screen.
Always shown within parentheses so you can
verify that you are referencing the correct table
(e.g., Path: main/config/alarm).
Brackets [ ] To indicate multiple selection choices when
multiple options can be displayed (e.g., Clear
[
Network/Port-1
] Statistics).
Text highlighted in red To indicate a hyperlink to additional information
when viewing this manual online. Click on the
highlighted text.