Router User's Guide

ManualsBrandsParadyne ManualsNetwork Router9126

Table Of Contents

Contents
About This Guide
- Purpose and Intended Audience
- Document Organization
- Product-Related Documents
- Conventions Used
1. About the FrameSaver SLV
- System Overview
  - CSU/DSU-Specific Features
  - Router-Specific Features
- FrameSaver Diagnostic and SLM Feature Sets
- FrameSaver Diagnostic Feature Set
  - Additional FrameSaver SLV 9126-II and 9128-II Features
  - Additional FrameSaver SLV 9128-II Features
- FrameSaver SLM Feature Set
- OpenLane SLM System
- NetScout Manager Plus and NetScout Probes
2. User Interface and Basic Operation
- Logging On
- Main Menu
- Screen Work Areas
- Navigating the Screens
- Navigating the Router’s CLI
  - CLI Keyboard Keys
3. Configuration Procedures
- Basic Configuration
4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
  - Setting Up Call Directories for Trap Dial-Out
  - Setting Up to Use the Modem PassThru Feature
- Setting Up Auto-Configuration
  - Selecting a Frame Relay Discovery Mode
  - Automatically Removing a Circuit
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
  - Changing Operating Mode
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
  - NAPT Configuration Example
  - NAT and NAPT Configuration Example
- Dynamic Host Configuration Protocol Server
  - DHCP Server with NAT Configuration Example
  - DHCP Server at Remote Site Configuration Example
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
  - Uploading and Downloading the Router Configuration Via the CLI
6. Security and Logins
- Limiting Access
- Controlling Asynchronous Terminal Access
- Limiting Dial-In Access via the Modem Port
- Controlling ISDN Access
  - ISDN Call Security
  - Disabling ISDN Access
- Controlling Telnet or FTP Access
- Controlling SNMP Access
- Creating a Login
- Modifying a Login
- Deleting a Login
- Controlling Router CLI Access
  - Access Levels (Command Modes)
  - Changing Access Levels
7. Operation and Maintenance
- Displaying System Information
- Viewing LEDs and Control Leads
- Device Messages
- Status Information
- IP Routing Table
- Performance Statistics
- Trap Event Log
- Modem Operation
- ISDN DBM Operation
- FTP File Transfers
- Turning Off the System Alarm Relay
8. Troubleshooting
- Problem Indicators
- Resetting the Unit and Restoring Communication
- Troubleshooting Management Link Feature
- LMI Packet Capture Utility Feature
  - Viewing Captured Packets from the Menu-Driven User Interface
- Alarms
- Viewing the Trap Event Log
- Troubleshooting Tables
- Tests Available
  - Test Timeout Feature
  - DBM Tests
- Starting and Stopping a Test
  - Aborting All Tests
- PVC Tests
- Physical Tests
- IP Ping Test
  - IP Ping Test – Procedure 1
  - IP Ping Test – Procedure 2
- Lamp Test
9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- OpenLane Support of FrameSaver Devices
- Setting Up the OpenLane SLM System
- Setting Up FrameSaver Support
- Ordering SLM Feature Set Activations
  - To Find Your License Key Number
  - The Activation Certificate
- Administering and Managing SLM Activations
10. Setting Up NetScout Manager Plus for FrameSaver Devices
- Preparation
- Configuring NetScout Manager Plus
- Monitoring a DLCI’s History Data
- Monitoring the Agent Using NetScout Manager Plus
- Statistical Windows Supported
11. Setting Up Network Health for FrameSaver Devices
- Installation and Setup of Network Health
- Discovering FrameSaver Elements
- Configuring the Discovered Elements
- Grouping Elements for Reports
- Generating Reports for a Group
- Reports Applicable to SLV Devices
A. Menu Hierarchy
- Menus
B. SNMP MIBs and Traps, and RMON Alarm Defaults
- MIB Support
- Downloading MIBs and SNMP Traps
- System Group (mib-2)
  - FrameSaver Unit’s sysDescr (system 1)
  - FrameSaver Unit’s sysObjectID (system 2)
- Interfaces Group (mib-2)
  - Paradyne Indexes to the Interface Table (ifTable)
  - NetScout Indexes to the Interface Table (ifTable)
- Standards Compliance for SNMP Traps
- RMON Alarm and Event Defaults
- Object ID Cross-References (Numeric Order)
C. Router CLI Commands, Codes, and Designations
- CLI Commands
- Ethernet Type Codes
- Protocol and Port Designations
D. Router Command Line Summaries and Shortcuts
- CLI Summaries
E. Connectors, Cables, and Pin Assignments
- Rear Panels
- COM Port Connector
- DTE Port Connector
  - Standard V.35 Straight-through Cable
  - Standard V.35 Crossover Cable
- DSX-1 Connector
- T1 Network Cable (Feature No. 3100-F1-500)
  - T1 Mass Termination Cable (Feature No. 9007-F1-500)
  - Canadian T1 Line Interface Cable (Feature No. 3100-F1-510)
- Ethernet Port Connector
- Modem Connector
- ISDN DBM Connector
  - ISDN Modular Cable
F. Technical Specifications
G. Equipment List
- Equipment
- Cables
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- Y

4. Configuration Options

9128-A2-GB20-80 September 2002

4-31

Configuring General System Options

Select General from the System menu to configure the general system

configuration options (see Table 4-5, General System Options).

Main Menu

→

Configuration

→

System

→

General

Table 4-5. General System Options (1 of 3)

Test Timeout

Possible Settings: Enable, Disable

Default Setting: Enable

Determines whether or not loopback and pattern tests have a duration after which they

are terminated automatically.

Enable – All Loopback and Pattern tests have a timeout. This setting is recommended

when the FrameSaver unit is managed remotely through an in-band data stream. If the

FrameSaver unit is accidently commanded to execute a disruptive test on the interface

providing the management access, control can be regained after the timeout expires,

terminating the test.

Disable – Loopback and pattern tests must be manually terminated.

Test Duration (min)

Possible Settings: 1 – 120

Default Setting: 10

Specifies the maximum duration of the tests.

Display Conditions

– This option only appears when Test Timeout is set to Enable.

1 – 120 – Sets the Test Timeout period in minutes (inclusive).

Primary Clock Source

Possible Settings: Net1, DSX, Internal, DBM

Default Setting: Net1

Allows you to select the primary clock source for the unit. The source selected provides all

of the timing within the FrameSaver unit and the clocks for all of the external interfaces.

Failure of the clock specified by this configuration option results in automatic fallback to

the Secondary Clock Source configuration option setting.

NOTE: For the Primary and Secondary Clock Source options, only Internal can be

selected for both options. All other selections must have different settings (e.g., if

Primary Clock Source is set to Net1, Secondary Clock Source cannot be set to Net1).

Net1 – The primary clock is derived from the Network1 T1 interface.

DSX – The primary clock for the unit is derived from the DSX-1 interface. This setting only

appears if the DSX-1 interface is enabled (see

Configuring the DSX-1 Interface

page 4-43).

Internal – The primary clock is the internal clock.

DBM – The primary clock is derived from the DBM. This selection only appears if the DBM

is installed and enabled.