Router User's Guide

ManualsBrandsParadyne ManualsNetwork Router9126

Table Of Contents

Contents
About This Guide
- Purpose and Intended Audience
- Document Organization
- Product-Related Documents
- Conventions Used
1. About the FrameSaver SLV
- System Overview
  - CSU/DSU-Specific Features
  - Router-Specific Features
- FrameSaver Diagnostic and SLM Feature Sets
- FrameSaver Diagnostic Feature Set
  - Additional FrameSaver SLV 9126-II and 9128-II Features
  - Additional FrameSaver SLV 9128-II Features
- FrameSaver SLM Feature Set
- OpenLane SLM System
- NetScout Manager Plus and NetScout Probes
2. User Interface and Basic Operation
- Logging On
- Main Menu
- Screen Work Areas
- Navigating the Screens
- Navigating the Router’s CLI
  - CLI Keyboard Keys
3. Configuration Procedures
- Basic Configuration
4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
  - Setting Up Call Directories for Trap Dial-Out
  - Setting Up to Use the Modem PassThru Feature
- Setting Up Auto-Configuration
  - Selecting a Frame Relay Discovery Mode
  - Automatically Removing a Circuit
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
  - Changing Operating Mode
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
  - NAPT Configuration Example
  - NAT and NAPT Configuration Example
- Dynamic Host Configuration Protocol Server
  - DHCP Server with NAT Configuration Example
  - DHCP Server at Remote Site Configuration Example
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
  - Uploading and Downloading the Router Configuration Via the CLI
6. Security and Logins
- Limiting Access
- Controlling Asynchronous Terminal Access
- Limiting Dial-In Access via the Modem Port
- Controlling ISDN Access
  - ISDN Call Security
  - Disabling ISDN Access
- Controlling Telnet or FTP Access
- Controlling SNMP Access
- Creating a Login
- Modifying a Login
- Deleting a Login
- Controlling Router CLI Access
  - Access Levels (Command Modes)
  - Changing Access Levels
7. Operation and Maintenance
- Displaying System Information
- Viewing LEDs and Control Leads
- Device Messages
- Status Information
- IP Routing Table
- Performance Statistics
- Trap Event Log
- Modem Operation
- ISDN DBM Operation
- FTP File Transfers
- Turning Off the System Alarm Relay
8. Troubleshooting
- Problem Indicators
- Resetting the Unit and Restoring Communication
- Troubleshooting Management Link Feature
- LMI Packet Capture Utility Feature
  - Viewing Captured Packets from the Menu-Driven User Interface
- Alarms
- Viewing the Trap Event Log
- Troubleshooting Tables
- Tests Available
  - Test Timeout Feature
  - DBM Tests
- Starting and Stopping a Test
  - Aborting All Tests
- PVC Tests
- Physical Tests
- IP Ping Test
  - IP Ping Test – Procedure 1
  - IP Ping Test – Procedure 2
- Lamp Test
9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- OpenLane Support of FrameSaver Devices
- Setting Up the OpenLane SLM System
- Setting Up FrameSaver Support
- Ordering SLM Feature Set Activations
  - To Find Your License Key Number
  - The Activation Certificate
- Administering and Managing SLM Activations
10. Setting Up NetScout Manager Plus for FrameSaver Devices
- Preparation
- Configuring NetScout Manager Plus
- Monitoring a DLCI’s History Data
- Monitoring the Agent Using NetScout Manager Plus
- Statistical Windows Supported
11. Setting Up Network Health for FrameSaver Devices
- Installation and Setup of Network Health
- Discovering FrameSaver Elements
- Configuring the Discovered Elements
- Grouping Elements for Reports
- Generating Reports for a Group
- Reports Applicable to SLV Devices
A. Menu Hierarchy
- Menus
B. SNMP MIBs and Traps, and RMON Alarm Defaults
- MIB Support
- Downloading MIBs and SNMP Traps
- System Group (mib-2)
  - FrameSaver Unit’s sysDescr (system 1)
  - FrameSaver Unit’s sysObjectID (system 2)
- Interfaces Group (mib-2)
  - Paradyne Indexes to the Interface Table (ifTable)
  - NetScout Indexes to the Interface Table (ifTable)
- Standards Compliance for SNMP Traps
- RMON Alarm and Event Defaults
- Object ID Cross-References (Numeric Order)
C. Router CLI Commands, Codes, and Designations
- CLI Commands
- Ethernet Type Codes
- Protocol and Port Designations
D. Router Command Line Summaries and Shortcuts
- CLI Summaries
E. Connectors, Cables, and Pin Assignments
- Rear Panels
- COM Port Connector
- DTE Port Connector
  - Standard V.35 Straight-through Cable
  - Standard V.35 Crossover Cable
- DSX-1 Connector
- T1 Network Cable (Feature No. 3100-F1-500)
  - T1 Mass Termination Cable (Feature No. 9007-F1-500)
  - Canadian T1 Line Interface Cable (Feature No. 3100-F1-510)
- Ethernet Port Connector
- Modem Connector
- ISDN DBM Connector
  - ISDN Modular Cable
F. Technical Specifications
G. Equipment List
- Equipment
- Cables
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- Y

Contents

9128-A2-GB20-80 September 2002

Status Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18

System and Test Status Messages . . . . . . . . . . . . . . . . . . . . . . . . 7-19

Network LMI-Reported DLCIs Status . . . . . . . . . . . . . . . . . . . . . . 7-29

IP Path Connection Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-31

PVC Connection Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-33

Time Slot Assignment Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-36

DBM Interface Status. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-38

IP Routing Table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-48

Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-50

Clearing Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . 7-51

Service Level Verification Performance Statistics . . . . . . . . . . . . . 7-52

DLCI Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-57

Additional Performance Statistics for IP Enabled DLCI. . . . . . . . . 7-59

Frame Relay Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . 7-60

ESF Line Performance Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . 7-64

DBM Call Performance Statistics. . . . . . . . . . . . . . . . . . . . . . . . . . 7-67

Ethernet Performance Statistics . . . . . . . . . . . . . . . . . . . . . . . . . . 7-68

Trap Event Log. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-69

Modem Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-70

Activating the Modem PassThru Feature . . . . . . . . . . . . . . . . . . . 7-70

Canceling Modem PassThru Operation. . . . . . . . . . . . . . . . . . . . . 7-70

Manually Disconnecting the Modem . . . . . . . . . . . . . . . . . . . . . . . 7-71

Verifying Modem Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-71

ISDN DBM Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-72

Forcing Backup (Disruptive) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-72

Placing a Test Call (Nondisruptive) . . . . . . . . . . . . . . . . . . . . . . . . 7-73

Verifying ISDN Lines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-74

Verifying That Backup Can Take Place. . . . . . . . . . . . . . . . . . . . . 7-74

FTP File Transfers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-75

Upgrading System Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-77

Upgrading ISDN BRI DBM Software . . . . . . . . . . . . . . . . . . . . . . . 7-78

Determining Whether a Download Is Completed. . . . . . . . . . . . . . 7-79

Changing Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-79

Transferring Collected Data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-80

Turning Off the System Alarm Relay . . . . . . . . . . . . . . . . . . . . . . . . . . 7-81

8 Troubleshooting

Problem Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2

Resetting the Unit and Restoring Communication . . . . . . . . . . . . . . . . 8-3

Resetting the Unit from the Control Menu . . . . . . . . . . . . . . . . . . . 8-3

Resetting the Unit By Cycling the Power. . . . . . . . . . . . . . . . . . . . 8-3

Restoring Communication with an Improperly Configured Unit. . . 8-4