Router User's Guide

ManualsBrandsParadyne ManualsNetwork Router9126

Table Of Contents

Contents
About This Guide
- Purpose and Intended Audience
- Document Organization
- Product-Related Documents
- Conventions Used
1. About the FrameSaver SLV
- System Overview
  - CSU/DSU-Specific Features
  - Router-Specific Features
- FrameSaver Diagnostic and SLM Feature Sets
- FrameSaver Diagnostic Feature Set
  - Additional FrameSaver SLV 9126-II and 9128-II Features
  - Additional FrameSaver SLV 9128-II Features
- FrameSaver SLM Feature Set
- OpenLane SLM System
- NetScout Manager Plus and NetScout Probes
2. User Interface and Basic Operation
- Logging On
- Main Menu
- Screen Work Areas
- Navigating the Screens
- Navigating the Router’s CLI
  - CLI Keyboard Keys
3. Configuration Procedures
- Basic Configuration
4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
  - Setting Up Call Directories for Trap Dial-Out
  - Setting Up to Use the Modem PassThru Feature
- Setting Up Auto-Configuration
  - Selecting a Frame Relay Discovery Mode
  - Automatically Removing a Circuit
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
  - Changing Operating Mode
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
  - NAPT Configuration Example
  - NAT and NAPT Configuration Example
- Dynamic Host Configuration Protocol Server
  - DHCP Server with NAT Configuration Example
  - DHCP Server at Remote Site Configuration Example
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
  - Uploading and Downloading the Router Configuration Via the CLI
6. Security and Logins
- Limiting Access
- Controlling Asynchronous Terminal Access
- Limiting Dial-In Access via the Modem Port
- Controlling ISDN Access
  - ISDN Call Security
  - Disabling ISDN Access
- Controlling Telnet or FTP Access
- Controlling SNMP Access
- Creating a Login
- Modifying a Login
- Deleting a Login
- Controlling Router CLI Access
  - Access Levels (Command Modes)
  - Changing Access Levels
7. Operation and Maintenance
- Displaying System Information
- Viewing LEDs and Control Leads
- Device Messages
- Status Information
- IP Routing Table
- Performance Statistics
- Trap Event Log
- Modem Operation
- ISDN DBM Operation
- FTP File Transfers
- Turning Off the System Alarm Relay
8. Troubleshooting
- Problem Indicators
- Resetting the Unit and Restoring Communication
- Troubleshooting Management Link Feature
- LMI Packet Capture Utility Feature
  - Viewing Captured Packets from the Menu-Driven User Interface
- Alarms
- Viewing the Trap Event Log
- Troubleshooting Tables
- Tests Available
  - Test Timeout Feature
  - DBM Tests
- Starting and Stopping a Test
  - Aborting All Tests
- PVC Tests
- Physical Tests
- IP Ping Test
  - IP Ping Test – Procedure 1
  - IP Ping Test – Procedure 2
- Lamp Test
9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- OpenLane Support of FrameSaver Devices
- Setting Up the OpenLane SLM System
- Setting Up FrameSaver Support
- Ordering SLM Feature Set Activations
  - To Find Your License Key Number
  - The Activation Certificate
- Administering and Managing SLM Activations
10. Setting Up NetScout Manager Plus for FrameSaver Devices
- Preparation
- Configuring NetScout Manager Plus
- Monitoring a DLCI’s History Data
- Monitoring the Agent Using NetScout Manager Plus
- Statistical Windows Supported
11. Setting Up Network Health for FrameSaver Devices
- Installation and Setup of Network Health
- Discovering FrameSaver Elements
- Configuring the Discovered Elements
- Grouping Elements for Reports
- Generating Reports for a Group
- Reports Applicable to SLV Devices
A. Menu Hierarchy
- Menus
B. SNMP MIBs and Traps, and RMON Alarm Defaults
- MIB Support
- Downloading MIBs and SNMP Traps
- System Group (mib-2)
  - FrameSaver Unit’s sysDescr (system 1)
  - FrameSaver Unit’s sysObjectID (system 2)
- Interfaces Group (mib-2)
  - Paradyne Indexes to the Interface Table (ifTable)
  - NetScout Indexes to the Interface Table (ifTable)
- Standards Compliance for SNMP Traps
- RMON Alarm and Event Defaults
- Object ID Cross-References (Numeric Order)
C. Router CLI Commands, Codes, and Designations
- CLI Commands
- Ethernet Type Codes
- Protocol and Port Designations
D. Router Command Line Summaries and Shortcuts
- CLI Summaries
E. Connectors, Cables, and Pin Assignments
- Rear Panels
- COM Port Connector
- DTE Port Connector
  - Standard V.35 Straight-through Cable
  - Standard V.35 Crossover Cable
- DSX-1 Connector
- T1 Network Cable (Feature No. 3100-F1-500)
  - T1 Mass Termination Cable (Feature No. 9007-F1-500)
  - Canadian T1 Line Interface Cable (Feature No. 3100-F1-510)
- Ethernet Port Connector
- Modem Connector
- ISDN DBM Connector
  - ISDN Modular Cable
F. Technical Specifications
G. Equipment List
- Equipment
- Cables
Index
- Numerics
- A
- B
- C
- D
- E
- F
- G
- H
- I
- K
- L
- M
- N
- O
- P
- Q
- R
- S
- T
- U
- V
- W
- Y

Contents

9128-A2-GB20-80 September 2002

iii

Assigning Time Slots/Cross Connections . . . . . . . . . . . . . . . . . . . . . . 4-51

Assigning Frame Relay Time Slots to the Network Interface . . . . 4-52

Assigning DSX-1 Time Slots to the Network Interface . . . . . . . . . 4-53

Assigning a Synchronous Data Port to Network or DSX-1

Time Slots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-59

Clearing Assignments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-60

Configuring Frame Relay for an Interface . . . . . . . . . . . . . . . . . . . . . . 4-61

Manually Configuring DLCI Records . . . . . . . . . . . . . . . . . . . . . . . . . . 4-64

Configuring PVC Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-68

Configuring the IP Path List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-72

Setting Up Management and Communication Options . . . . . . . . . . . . 4-73

Configuring Node IP Information . . . . . . . . . . . . . . . . . . . . . . . . . . 4-74

Configuring Management PVCs . . . . . . . . . . . . . . . . . . . . . . . . . . 4-77

Configuring General SNMP Management . . . . . . . . . . . . . . . . . . . 4-83

Configuring Telnet and/or FTP Session Support. . . . . . . . . . . . . . 4-84

Configuring SNMP NMS Security . . . . . . . . . . . . . . . . . . . . . . . . . 4-87

Configuring SNMP Traps and Trap Dial-Out . . . . . . . . . . . . . . . . . 4-88

Configuring Ethernet Management . . . . . . . . . . . . . . . . . . . . . . . . 4-94

Configuring the Communication Port. . . . . . . . . . . . . . . . . . . . . . . 4-96

Configuring the Modem Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-100

Configuring the Criteria for Automatic Backup. . . . . . . . . . . . . . . . . . . 4-104

5 Configuring the FrameSaver SLV Router

FrameSaver SLV Router Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2

IP Routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Address Resolution Protocol . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Proxy ARP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3

Interface Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-4

Network Address Translation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

IP Options Processing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

Applications Supported by NAT. . . . . . . . . . . . . . . . . . . . . . . . . . . 5-5

NAT Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6

Network Address Port Translation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

NAPT Configuration Example . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-8

NAT and NAPT Configuration Example. . . . . . . . . . . . . . . . . . . . . 5-10

Dynamic Host Configuration Protocol Server. . . . . . . . . . . . . . . . . . . . 5-11

DHCP Server with NAT Configuration Example . . . . . . . . . . . . . . 5-12

DHCP Server at Remote Site Configuration Example. . . . . . . . . . 5-13

DHCP Relay Agent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13