Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80 September 2002
B-3
System Group (mib-2)
This section provides the system object identifier and system description for the
System Group for the FrameSaver unit, which is an SNMPv1 MIB.
FrameSaver Unit’s sysDescr (system 1)
The following is the system description (sysDescr [system 1]) for the NMS
subsystem in the FrameSaver unit:
PARADYNE T1 FrameSaver SLV; Model:
[9126/9126-II/9126-IIR/9128-II]
; S/W
Release:
(MM.mm.bb [Major.minor.build] format)
; NAM CCA number:
(hardware version in hhhh-hhh format)
; Serial number:
sssssss
FrameSaver Unit’s sysObjectID (system 2)
The following is the system object identifier (sysObjectID [system 2]), or OID, for
the NMS subsystem in the FrameSaver units:
FrameSaver SLV 9126-SLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7
FrameSaver SLV 9126-II: 1.3.6.1.4.1.1795.1.14.2.4.4.7.1
FrameSaver SLV 9126-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.7
FrameSaver SLV 9126-IIR: 1.3.6.1.4.1.1795.1.14.2.4.11.4.1
FrameSaver SLV 9126-IIRSLV: 1.3.6.1.4.1.1795.1.14.2.4.11.4
FrameSaver SLV 9128-II: 1.3.6.1.4.1.1795.1.14.2.4.4.8.1
FrameSaver SLV 9128-IISLV: 1.3.6.1.4.1.1795.1.14.2.4.4.8
Interfaces Group (mib-2)
Clarification for objects in the Interfaces Group, as defined in RFC 1573 and
RFC 1213, which is an SNMPv1 MIB, is provided in this section.
Paradyne Indexes to the Interface Table (ifTable)
The following table provides the ifName for each interface type, the ifDescr, and
the ifIndex that Paradyne has assigned to each.
Table B-1. Paradyne Interface Objects Information (1 of 3)
ifName Description ifDescr (ifEntry 2) ifIndex
Physical Layer
Network T1 T1 network interface Network T1; T1 FR NAM;
Hardware Version:
hhhh-hhh
101001001
DSX-1 T1 DSX-1 interface DSX-1 T1; T1 FR NAM;
Hardware Version:
hhhh-hhh
101002001
Sync Data Port
S01P1
Synchronous Data
Port-1
Synchronous Data Port, Slot: 1,
Port: 1; T1 FR NAM; Hardware
Version:
hhhh-hhh
101003001