Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index

7. Operation and Maintenance
9128-A2-GB20-80 September 2002
7-45
Normal Call
Clearing
16 Call is being cleared
because either the caller or
receiver has requested that
it be cleared.
No action is needed.
Normal, Unspecified 31 Remote user has sent a
release message to the
network.
No other cause in the
normal class applies for this
normal event.
No action is needed.
No User
Responding
18 Called device does not
respond to the call with an
alert or connect indication
within the prescribed period
of time.
Internal network timers may
be a cause.
Contact the network
provider if the cause
continues.
Number Changed 22 Called number is no longer
assigned.
Look in the diagnostic field
for the new number, then
change the phone number
in your ISDN link profile.
Only Restricted
Bearer Capability
Available
70 An unrestricted bearer
service has been
requested, but the device
sending the cause only
supports the restricted
version.
Arrange for the desired
capability.
Outgoing Calls
Barred
52 Network is using Call
Screening.
Contact the network
provider to turn Call
Screening off.
Pre-empted 45 Call has been pre-empted. Contact the network
provider.
Protocol Error,
Unspecified
111 No other cause in the
protocol error class applies
for this protocol error event.
Contact your service
representative.
Quality of Service
Unavailable
49 Requested Quality of
Service requested cannot
be provided (e.g.,
throughput cannot be
supported).
No action is needed.
Recovery of Timer
Expired
102 Error-handling procedure
has been initiated as a
result of the expiration of a
timer.
Retry the call.
Table 7-14. Most Recent and Previous Cause Value Messages (4 of 6)
Message
Cause
No. What It Indicates What To Do










