Router User's Guide
Table Of Contents
- Contents
- About This Guide
- 1. About the FrameSaver SLV
- 2. User Interface and Basic Operation
- 3. Configuration Procedures
- 4. Configuration Options
- Using the Easy Install Feature
- Using RIP with FrameSaver SLV CSU/DSUs
- Entering System Information and Setting the System Clock
- Setting Up the Modem
- Setting Up Auto-Configuration
- Setting Up Dial Backup
- PVC Backup Over the Network Interface
- Setting Up Back-to-Back Operation
- Configuration Option Tables
- Configuring the Overall System
- Configuring Physical Interfaces
- Assigning Time Slots/Cross Connections
- Configuring Frame Relay for an Interface
- Manually Configuring DLCI Records
- Configuring PVC Connections
- Configuring the IP Path List
- Setting Up Management and Communication Options
- Configuring the Criteria for Automatic Backup
- 5. Configuring the FrameSaver SLV Router
- FrameSaver SLV Router Overview
- IP Routing
- Address Resolution Protocol
- Proxy ARP
- Interface Configuration
- Network Address Translation
- Network Address Port Translation
- Dynamic Host Configuration Protocol Server
- DHCP Relay Agent
- Router Security
- Provisioning the Router Interface
- Configuring the Router Using Terminal Emulation
- 6. Security and Logins
- 7. Operation and Maintenance
- 8. Troubleshooting
- 9. Setting Up OpenLane for FrameSaver Devices and Activating SLM Features
- 10. Setting Up NetScout Manager Plus for FrameSaver Devices
- 11. Setting Up Network Health for FrameSaver Devices
- A. Menu Hierarchy
- B. SNMP MIBs and Traps, and RMON Alarm Defaults
- C. Router CLI Commands, Codes, and Designations
- D. Router Command Line Summaries and Shortcuts
- E. Connectors, Cables, and Pin Assignments
- F. Technical Specifications
- G. Equipment List
- Index
7. Operation and Maintenance
7-14
September 2002 9128-A2-GB20-80
Invalid Password Login is required and an
incorrect password was
entered; access is denied.
Try again.
Contact your system
administrator to verify your
password.
Invalid Test
Combination
A conflicting loopback or
pattern test was in progress
when Start was selected to
start another test, or was
active on the same or
another interface when
Start was selected.
Wait until other test ends and
message clears.
Cancel all tests from the Test
screen (Path: main/test).
Stop the test from the same
screen the test was started
from.
Limit of six Login IDs
reached
An attempt to enter a new
login ID was made, and the
limit of six login/password
combinations has been
reached.
Delete another login/password
combination.
Reenter the new login ID.
Limit of Mgmt PVCs
reached
N
ew was selected from the
PVC Connection Table and
the maximum number of
management PVCs has
already been created.
Do not create the management
PVC.
Delete another management
PVC, and try again.
Limit of PVC
Connections reached
N
ew was selected from the
PVC Connection Table and
the maximum number of
PVCs has already been
created.
Do not create the PVC
connection.
Delete another PVC
connection, and try again.
Name Must be Unique Name entered for a
management PVC has
been used previously.
Enter another 4-character name
for the logical/management link.
No Destination Link
DLCIs Available
N
ew was selected from the
PVC Connection Table, but
even though DLCIs are
available to form a
connection, no DLCIs are
available on the network
link, which is a suitable PVC
Destination.
Configure additional DLCIs for the
network link and try again.
No DLCIs available for
connection
N
ew was selected from the
PVC Connection Table, but
all configured DLCIs have
been connected.
No action needed, or configure
more DLCIs and try again.
N
ew was selected from the
Management PVCs option
screen, but all Link/DLCI
pairs have been connected.
Configure more network and/or
Port-1 Links/DLCIs pairs and try
again.
Table 7-6. Device Messages (3 of 6)
Message What It Indicates What To Do