Installation Manual

Omnia 15
Sections
[711]
to
[718]
represent the remote controls assigned to sections
[721]
/
[731]
to
[728]
/
[738]
(refer to section 5.1 on page 13). For example, the buttons for
the remote control assigned in section
[731]
will be programmed in section
[711]
.
Table 5.1: Remote Control Button Programming
How to program the remote control buttons:
In step 3 in section 3.1 on page 6:
1. Enter the desired
[
SECTION NUMBER
]
(711 to 718).
2. Enter the hexadecimal value (0 to D) of the desired options from Table 5.2 on
page 16 in the appropriate space (refer to Table 5.1 on page 15). If you do
not wish to program all the buttons or button combinations, simply press the
[
ENTER
]
button at any time to save and exit.
Note: Press the
[
FORCE
]
button 8 times, that is, once for every button or
button combination.
Remote Control Button Programming (refer to Table 5.2)
Section
[711] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #1
[712] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #2
[713] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #3
[714] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #4
[715] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #5
[716] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #6
[717] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #7
[718] ____/____/____/____/____/____/____/____
A B C D A+B C+D A+C B+D
remote control #8