User's Guide

Arming / Disarming 19
Standard Fire Zones
During a fire alarm, the siren emits an intermittent sound (BEEP-BEEP-BEEP) until silenced or reset. If the zone is a Standard Fire
Zone, your system can immediately send an alert to your Central Monitoring Station. To disarm a false alarm:
Delayed Fire Zones
If the zone is a Delayed Fire Zone, there is an automatic delay before your system contacts your Central Monitoring Station. Refer to
Figure 3 on page 20 to prevent unnecessary reporting of false alarms. To clear a fire alarm triggered by accident:
If you are unable to cancel the false alarm, your system will send an alert. Call your Central Monitoring Station to advise them of the false
alarm.
User code
Call your Central Monitoring Station quickly
to advise them of the false alarm.
Press within
30 seconds
of alarm
Clear problem from area (i.e. smoke around
the smoke detector).
If the problem remains after 90 seconds, the
alarm will sound again.
Alert will be
delayed by
another 30
seconds