User's Guide

Overview 9
Magellan’s Keypads
Use this keypad to enter user
codes, required data and/or
to select desired menus.
Main Keypad
Center Keypad
Use keys [1] to [16] of the center keypad for the following:
Zones 1 to 16*
OFF = Zone closed (ok)
ON = Zone opened
Flashing = The zone has been tampered with
Press once = Listen to zone’s label (ex.: “Front door”)
* = Press and hold key [16] to listen to the label for zone 16. See Key [16] below for
more information.
Users 1 to 16
When programming a user:
OFF = User not programmed
ON = User programmed
Press once = Listen to user label and program or edit a user
X10 programming
This keypad is also used when programming and using Magellan’s X10 features.
Refer to Magellan’s X10 Instruction Guide which can be downloaded for free from our
Web site at www.paradox.ca.
Key [16]
Press once = Make a telephone call or answer an incoming call. Press again to hang
up. See page 27.
Press & hold = Listen to the zone label of zone 16.
Fast flashing = Speakerphone in use (page 27)