Installation Guide
Table Of Contents
- Introduction
- About Magellan and this Manual
- Conventions
- Specifications
- Quick Setup
- Installation
- AC Power
- Backup Battery Pack
- Telephone Line Connections
- Programmable Outputs (PGMs)
- Hardwire Zone Connections
- WinLoad Connection
- UIP-256 Universal In-Field Programmer Connection
- X10 Transmitter Connection
- Connecting a Paradox Memory Key (PMC-3)
- Location and Mounting
- Connecting the Radio Antenna
- Programming Methods
- WinLoad Installer Upload/Download Software
- Programming Using the Built-in Keypad
- Programming Using a Paradox Memory Key
- User Codes
- User Code Length
- Installer Code
- Maintenance Code
- System Master Code
- Duress Code
- Zone Programming
- Zone Programming Overview
- Zone Definitions
- Zone Options
- Zones 15 and 16 become Hardwire Zones
- EOL (End-Of-Line) Zones
- Wireless Programming
- Assigning Wireless Zone Transmitters
- Assigning Wireless Doorbells to the Console
- Deleting Assigned Wireless Transmitters
- Viewing Wireless Transmitter Signal Strength
- Assigning Remote Controls
- Programming the Remote Control’s Buttons
- Arming and Disarming
- Regular Arming Switches to Stay Arming
- Regular Arming Switches to Force Arming
- Stay Arming Switches to Force Arming
- Timed Auto-Arming
- No Movement Auto-Arming
- Auto-Arming Options
- One-Touch Arming
- Exit Delay
- Bell Squawk on Arm/Disarm with Remote Control
- No Exit Delay when Arming with Remote Control
- Exit Delay Termination
- Follow Zone Switches to Entry Delay 2
- Closing Delinquency Timer
- Alarm Options
- Bell Cut-off Timer
- Wireless Transmitter Supervision Options
- Tamper Recognition Options
- Check-in Supervision Options
- Panic Alarms
- Reporting and Dialer Settings
- Report Codes
- Console Telephone Numbers
- Console Account Number
- Reporting Formats
- Event Call Direction
- Delay Between Dialing Attempts
- Alternate Dial Option
- Force Dial Option
- Dialing Method
- Pulse Ratio
- Switch to Pulse Dialing on 5th Attempt
- Telephone Line Monitoring (TLM)
- Recent Close Delay
- Auto-Test Report
- Power Failure Report Delay
- Disarm Reporting Options
- Zone Restore Report Options
- Programmable Outputs
- PGM Activation Event
- PGM Deactivation Event
- PGM Delay
- PGM Normal State
- PGM X10 Option
- System Settings
- Software Reset
- Installer Lock
- Console Tamper Supervision
- Console Audible Trouble Warning
- FM Tuner Option
- Daylight Savings Time
- AC Power Failure Warning
- The Trouble Display
- WinLoad Software Settings
- Panel Answer Options
- Panel Identifier
- PC Password
- PC Telephone Number
- Call Back Feature
- Appendix 1: Ademco Contact ID Report Code List
- Index
Paradox Magellan Systems 41
V
Viewing
..........................................................................17
Viewing transmitter signal strength
...............................17
Voice message repetitions
............................................26
Voice message telephone numbers
..............................26
W
Wall plate
.........................................................................9
WinLoad
........................................................................11
WinLoad settings
Call back feature
........................................................33
Panel answer options
.................................................33
Panel identifier
...........................................................33
PC password
.............................................................33
PC telephone number
................................................33
Wireless programming
Assigning remote controls
...........................................18
Assigning wireless doorbells
.......................................17
Assigning wireless zones
............................................17
Deleting wireless zones
..............................................17
Programming remote control buttons
...........................18
Viewing signal strength
...............................................17
Wireless Transmitter Supervision options
.....................22
Wireless zones become hardwire
.................................16
Wirless doorbell tones
...................................................17
X
X10 connections
..............................................................9
X10 PGM option
............................................................30
Z
Zone alarm report codes
...............................................24
Zone alarm restore report codes
...................................24
Zone definitions
24Hr. Burglary Zones
.................................................14
24Hr. Buzzer Zones
...................................................14
24Hr. Freeze Zones
...................................................15
24Hr. Gas Zones
.......................................................15
24Hr. Heat Zones
......................................................15
24Hr. Hold-up Zones
..................................................14
24Hr. Water Zones
.....................................................15
Delayed Fire Zones
....................................................14
Entry Delay 1
............................................................13
Entry Delay 2
............................................................13
Follow Zones
.............................................................13
Follow/Stay Zones
.....................................................14
Instant Zones
............................................................14
Instant/Stay Zones
.....................................................14
Standard 24Hr. Fire Zones
..........................................14
Zone options
Alarm types
...............................................................15
Auto-zone Shutdown
..................................................15
Bypass option
............................................................15
Delay before Alarm Code Transmission
.......................16
Force Zones
..............................................................16
Intellizone
.................................................................15
Stay Delay Zones
......................................................16
Zone programming
........................................................13
Zone restore report options
...........................................29
Zone tamper report codes
.............................................25
Zone tamper restore report codes
................................ 25
Zone, hardwire
................................................................ 8