Installation Instructions

2 Reference & Installation Manual
1.4 Specifications
Bell, PGMs and Auxiliary are rated to operate between 10.8Vdc and 12.1Vdc
MG5000 / MG5050
Power rating 16.5 VAC (50 or 60Hz) minimum 20 VA (40 VA recommended)
Power consumption MG5000: 1.2A(Max.), 85mA (Idle) MG5050: 1.2A(Max.), 95mA (Idle)
Aux. BUS * 600 mA typical, 700 mA maximum, fuseless shutdown at 1.1A
Battery 12 VDC, 4Ah/7Ah
Battery charging current 350 mA
On-board zones MG5000: 2, MG5050: 5
Bell current ** 1A (fuseless shutdown at 3A)
On-board PGMs MG5000: 2
MG5050: 4 (1+/- trigger)
All on-board PGMS are 100mA low-current outputs
Dimensions MG5000: 14 x 10.4cm (5.5 x 4.1”)
MG5050: 19 x 10.2cm (7.5 x 4”)
Weight 18 g
Operating temperature 0°C to 50°C (32°F to 122°F)
Humidity 5% - 90%
* Cannot exceed 200 mA for UL installations
** Cannot exceed 1A for UL installations
30hrs backup 60hrs backup Recharge to 80%(@350mA)
7AHr 150mA 50mA 20 hrs.