User's Manual
Table Of Contents
- Basic Operations
- Programming Access Codes
- System Master Code (Default: 123456)
- Master Codes
- Duress Code
- Programming Access Codes
- 2. Enter your [system master code] or either [master code].
- 3. The [] key will flash. When a zone LED or zone key is lit (not flashing), the user is already programmed.
- 4. Select a user by entering a 2-digit user number (i.e. [0]+[9] for user 9) or use the scroll keys and then press [enter]. For the MG10LEDV/H, press the key corresponding to the user number (i.e. [9] for user 9).
- 5. Enter a new 4- or 6-digit [access code].
- 6. Confirm the code.
- 7. Press a button on the designated remote or press [enter] to skip if there is no remote to program.
- 8. (Not available for non-partitioned system) Press [1] and/or [2] to assign the user to a partition. Press [enter], the menu will now jump to the next available user, if you choose to continue.
- 2. Enter your [system master code] or either [master code].
- 3. Select a user by entering a 2-digit user number (i.e. [0]+[9] for user 9). For the MG10LEDV/H, enter a 1-digit user number (i.e. [9] for user 9).
- 4. Press the [sleep] key until you hear the confirmation beep.
- Regular Arming
- Sleep Arming
- Stay Arming
- One-Touch Arming
- Auto-Arming
- Timed Auto Arming
- 2. Enter [master code].
- 3. Press the [byp] key. The [byp] key will flash to indicate you are in the System Options menu.
- 4. Press key [1] to set partition 1, or press key [2] to set partition 2.
- 5. Enter the desired time for auto arm (24 hour clock, e.g. 18:30).
- 6. Press key [1] to regular arm, key [2] to sleep arm, or key [3] to stay arm the partition.
- No Movement Auto Arming
- Timed Auto Arming
- Disarming & Deactivating an Alarm
- 2. Press [off] + enter [access code].
- 3. If you have access to both partitions (see Partitioning on page 3): Press the key corresponding to the desired partition ([1] or [2]). For both partitions, press the other key after the confirmation beep.
- Manual Bypass Programming
- 2. Enter your [access code] (see the note below). The [byp] key will flash.
- 3. Illuminate the number(s) corresponding to the zone(s) you want to bypass by entering the two-digit zone number (i.e. zone 3 = 03). Solid on = Zone open, Flash = Zone bypass, Off = Zone closed, not bypassed.
- 4. Press the [enter] key to save and exit.
- Bypass Recall Feature
- Display Mode
- Alarm Display
- Fire Alarms
- Panic Alarms
- Programming Chime Zones
- Keypad Muting
- Keypad Backlight
- PGM Keys (Programmable Outputs)
- Power Save Mode
- Trouble Display
- 2. Read the corresponding explanation of the trouble from the Trouble List below. If no repair instructions are given, call your monitoring station for repairs.
- 3. Press the [clear] key to exit.
- Trouble List
- 2. Enter the hour and minutes. If the hour is between 01 and 12, you will need to select [1] for 24Hr format, [2] for AM, and [3] for PM setting. If the hour is above 12, the system will automatically select the 24Hr format.
- 3. Enter the year (4 digits).
- 4. Enter the month (2 digits).
- 5. Enter the day (2 digits). You have now set the Time & Date. Press [clear] to exit.
- Quick Function Keys
- Testing & Maintenance
- System Checklist
- Master Quick Menu MG5000
- Overview
- User
- PGMs
- PGM Utility Keys
- System Timers
- Other Information
- Access Codes
- 2. The [] key will flash. When a zone LED or zone key is lit (not flashing), the user is already programmed.
- 3. Select a user by entering a 2-digit user number (i.e. [0]+[9] for user 9) or use the scroll keys and then press [enter]. For the MG10LEDV/H, press the key corresponding to the user number (i.e. [9] for user 9).
- 4. Enter a new 4- or 6-digit [access code].
- 5. Confirm the code.
- 6. Press a button on the designated remote or press [enter] to skip if there is no remote to program.
- 7. (Partitioned system only) Press [1] and/or [2] to assign the user to a partition. Press [enter], the menu will now jump to the next available user.
Table of Contents
Access Codes............................................................... 0
Overview................................................................. 2
Basic Operations ............................................. 2
Auditory Feedback........................................................ 2
Visual Feedback ........................................................... 2
Overview of the Magellan Series Keypads................... 2
Partitioning.................................................................... 3
Access Codes........................................................ 4
Programming Access Codes.......................... 4
System Master Code (Default: 123456) ....................... 4
Master Codes ............................................................... 4
Duress Code................................................................. 4
Programming Access Codes ........................................ 4
Arming & Disarming.............................................. 5
Regular Arming................................................ 5
Sleep Arming.................................................... 5
Stay Arming...................................................... 5
One-Touch Arming .......................................... 6
One-Touch Regular Arming.......................................... 6
One-Touch Stay Arming............................................... 6
One-Touch Sleep Arming............................................. 6
One-Touch Bypass Programming ................................ 6
Fast Exit........................................................................ 6
Auto-Arming..................................................... 7
Timed Auto Arming....................................................... 7
No Movement Auto Arming........................................... 7
Disarming & Deactivating an Alarm............... 7
Manual Bypass Programming....................................... 7
Bypass Recall Feature ................................................. 8
System Features.................................................... 9
Display Mode.................................................... 9
Alarm Display................................................... 9
Fire Alarms....................................................... 9
Minimizing Fire Hazards ............................................... 9
Fire Safety Tips ............................................................ 9
Providing a Fire Warning System................................. 9
Panic Alarms.................................................... 9
Programming Chime Zones.......................... 10
Keypad Muting............................................... 10
Keypad Backlight........................................... 10
PGM Keys (Programmable Outputs) ............ 10
Power Save Mode........................................... 11
Trouble Display .............................................. 11
Trouble List ................................................................ 11
Advanced Features...............................................
12
Quick Function Keys...................................... 12
Test Report ................................................................ 12
Call PC....................................................................... 12
Answer PC................................................................. 12
Cancel Communication.............................................. 12
Testing & Maintenance .................................. 12
System Checklist............................................ 13
Zone Description........................................................ 13
Special Keys and Features........................................ 14
Panic Alarms.............................................................. 14
PGMs......................................................................... 15
PGM Utility Keys........................................................ 15
System Timers........................................................... 15
Other Information....................................................... 15
Delays........................................................................ 17
Communicator............................................................ 17
System Options.......................................................... 17
Master Quick Menu MG5000.......................... 18
Overview.................................................................... 18
User ........................................................................... 18