Installation Instructions
Table Of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 4: Access Codes
- Part 5: Zone Programming
- Part 6: Wireless Features
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming Switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming on Battery Fail
- 7.5 Restrict Arming on Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm with Keypad
- 7.12 Bell Squawk On Arm/Disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.2.1 Arming Report Codes
- 9.2.2 Special Arming Report Codes
- 9.2.3 Disarming Report Codes
- 9.2.4 Special Disarming Report Codes
- 9.2.5 Zone Alarm Report Codes
- 9.2.6 Zone Alarm Restore Report Codes
- 9.2.7 Special Alarm Report Codes
- 9.2.8 Zone Tamper Report Codes
- 9.2.9 Zone Tamper Restore Report Codes
- 9.2.10 System Trouble Report Codes
- 9.2.11 System Trouble Restore Codes
- 9.2.12 Special Reporting Codes
- 9.3 Monitoring Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Closing Delinquency Timer
- 9.18 Power Failure Report Delay
- 9.19 Disarm Reporting Options
- 9.20 Zone Restore Report Options
- 9.21 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 Reprogram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC Warnings
- Index
52 Reference & Installation Manual
Trouble Restore Codes ................................................. 30
T
Tamper Bypass Options ..................................................26
Tamper Recognition ........................................................ 25
Telephone Line Connection ............................................... 4
Telephone Line Monitoring (TLM) ................................... 34
Telephone Number, PC ................................................... 40
Telephone Numbers ........................................................ 30
Test Report
Automatic .................................................................... 33
Manual ....................................................................... 38
Report Code ................................................................ 30
Timed Auto-Arming .......................................................... 23
Report Code ................................................................ 28
Timer ...............................................................................33
Timer Loss Report Code ................................................. 29
Transformer Requirements ................................................ 2
Transmission Options, Pager Format .............................. 31
Trouble Display ................................................................ 42
Tx Supervision
Loss Report Code ........................................................ 30
Restore Report Code .................................................... 30
U
Upload/Download Software ............................................... 7
User Code Options
Arm Only ..................................................................... 11
Bypass Programming ................................................... 11
Force Arming ...............................................................11
Partition 1 Assignment .................................................. 10
Partition 2 Assignment .................................................. 11
PGM Activation ............................................................ 11
Stay Arming ................................................................ 11
User Operation ................................................................ 42
W
Winload Software .............................................................. 7
Wireless Features ............................................................18
Wireless Fire Zone Programming .................................... 15
Wireless Low Battery Report Code ................................. 29
Wireless Transmitters
Assigning .................................................................... 18
Check-in Supervision .................................................... 19
Check-in Supervision Timer Settings .............................. 20
Deleting ......................................................................18
Low Battery Supervision ......................................... 20, 39
Programming ............................................................... 18
Serial Number Display ..................................................19
Supervision Options ..................................................... 39
Viewing Signal Strength ................................................ 19
Z
Zone Alarm Report Codes ............................................... 28
Zone Alarm Restore Report Codes ................................. 29
Zone Definitions
24Hr. Burglary Zones ................................................... 14
24Hr. Buzzer ............................................................... 14
Entry Delay 1 ............................................................... 14
Entry Delay 2 ............................................................... 14
Follow Zones ............................................................... 14
Instant Zones .............................................................. 14
Zone Options
Alarm Types ................................................................ 16
Auto Zone Shutdown .................................................... 16
Delay Before Alarm Report Code Transmission ............... 17
Force Zones ................................................................ 17
Intellizone ................................................................... 16
Keyswitch Options ....................................................... 17
Stay Zones .................................................................. 16
Zone Partition Assignment ..............................................15
Zone Programming .......................................................... 12
Zone Restore Report Options .......................................... 34
Zone Shutdown, Auto ...................................................... 16
Zone Speed ..................................................................... 17
Zone Tamper
Report Codes .............................................................. 29
Restore Report Codes .................................................. 29
Zones Options
Bypass Zones .............................................................. 16