Installation Instructions
Table Of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 4: Access Codes
- Part 5: Zone Programming
- Part 6: Wireless Features
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming Switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming on Battery Fail
- 7.5 Restrict Arming on Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm with Keypad
- 7.12 Bell Squawk On Arm/Disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.2.1 Arming Report Codes
- 9.2.2 Special Arming Report Codes
- 9.2.3 Disarming Report Codes
- 9.2.4 Special Disarming Report Codes
- 9.2.5 Zone Alarm Report Codes
- 9.2.6 Zone Alarm Restore Report Codes
- 9.2.7 Special Alarm Report Codes
- 9.2.8 Zone Tamper Report Codes
- 9.2.9 Zone Tamper Restore Report Codes
- 9.2.10 System Trouble Report Codes
- 9.2.11 System Trouble Restore Codes
- 9.2.12 Special Reporting Codes
- 9.3 Monitoring Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Closing Delinquency Timer
- 9.18 Power Failure Report Delay
- 9.19 Disarm Reporting Options
- 9.20 Zone Restore Report Options
- 9.21 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 Reprogram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC Warnings
- Index
Reference & Installation Manual
Settings for WinLoad Software .................................... 40
Panel Answer Options ...................................................................... 40
Panel Identifier.................................................................................. 40
PC Password.................................................................................... 40
PC Telephone Number ..................................................................... 40
Call WinLoad Software ..................................................................... 40
Answer WinLoad Software ............................................................... 41
Auto Event Buffer Transmission ....................................................... 41
Call Back WinLoad ........................................................................... 41
User Operation.............................................................. 42
Trouble Display................................................................................. 42
Programming Access Codes ............................................................ 43
Disarming & Deactivating an Alarm .................................................. 43
Regular Arming................................................................................. 44
Stay Arming ...................................................................................... 44
Instant Arming................................................................................... 44
Force Arming (Not to be used with UL Installations) ........................ 44
Manual Bypass Programming........................................................... 44
One-Touch Arming ........................................................................... 45
Keyswitch Arming ............................................................................. 45
Panic Alarms..................................................................................... 45
Auto-Arming (Not to be used with UL installations) .......................... 45
Alarm Memory Display...................................................................... 46
Programming Chime Zones.............................................................. 46
Keypad Muting (Not to be used with UL installations) ...................... 46
Keypad Backlight (1686H and 1686V only) ...................................... 46
FCC Warnings................................................................ 47
Index ............................................................................... 49
List of Tables
Transformer Requirements Table....................................................... 2
Current Consumption Table................................................................ 4
Decimal and Hexadecimal Programming Table ................................. 7
Zone Recognition Table .................................................................. 12
Sections and Expansion Inputs ........................................................ 18
Remote Control Button Programming............................................... 21
Button Options.................................................................................. 22
Special Keys for Telephone Numbers .............................................. 30
Reporting Formats............................................................................ 31
Zone Tamper Report Code for Keypad Tamper Supervision Failure.. 37
Trouble List....................................................................................... 42