User's Manual
Table Of Contents
- Table of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 5: Zone Programming
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming On Battery Fail
- 7.5 Restrict Arming On Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm With Keypad
- 7.12 Bell Squawk On Arm/disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.3 Central Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Power Failure Report Delay
- 9.18 Disarm Reporting Options
- 9.19 Zone Restore Report Options
- 9.20 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 ReProgram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC WARNINGS
- Index
Assigning to User Access Codes ...................................25
Assignment Mode ........................................................ 24
Deleting ......................................................................25
Programming ...............................................................24
Programming Remote Control Buttons ...........................25
Report Codes ..................................................................33
Reporting and Dialer settings ..........................................32
Reporting Formats ...........................................................35
Re-Program All Expansion Modules ...............................44
Reset, Hardware .............................................................41
Restrict Arming On Battery Fail .......................................27
Restrict Arming on Supervision Loss ..............................44
Restrict Arming On Tamper Trouble ...............................27
Rings ...............................................................................45
S
Single Zone Inputs ............................................................9
Software, Upload/download ............................................11
Special Alarm Report Codes ...........................................34
Special Arming Report Codes .........................................33
Special Disarming Report Codes ....................................33
Special Reporting Codes .................................................35
Standard 24Hr. Fire Zone ................................................19
Stay Arming .....................................................................49
Stay Delay .......................................................................27
Stay Zones ......................................................................20
Strobe Options ................................................................40
Supervision Bypass Options ...........................................44
Supervision Options, Wireless Transmitter .....................44
Switch to Stay Arming .....................................................27
System Master Code .......................................................14
System Real-Time Clock .................................................41
System Settings ..............................................................41
System Trouble Report Codes ........................................34
System Trouble Restore Codes ......................................35
T
Tamper Bypass Options ..................................................30
Tamper Recognition ........................................................30
Telephone Line Connection ..............................................8
Telephone Line Monitoring (TLM) ...................................38
Telephone Number, PC ...................................................45
Telephone Numbers ........................................................35
Test Report, Automatic ....................................................38
Test Report, Manual ........................................................43
Timed Auto-Arming .........................................................27
Transformer Requirements ...............................................6
Trouble Display ...............................................................47
U
Upload/Download Software .............................................11
User Code Options
Arm Only .....................................................................15
Bypass Programming ...................................................15
Force Arming ...............................................................15
Partition 1 Assignment ..................................................14
Partition 2 Assignment ..................................................15
PGM Activation ............................................................15
Stay Arming ................................................................15
User Operation ................................................................ 47
W
Winload Software ............................................................11
Wireless Transmitters
Assigning ....................................................................22
Check-in Supervision ...................................................24
Check-in Supervision Timer Settings .............................. 24
Deleting ......................................................................23
Low Battery Supervision .........................................24, 44
Programming ...............................................................22
Serial Number Display ..................................................23
Supervision Options .....................................................44
Viewing Signal Strength ................................................23
Wireless Zone Programming ...........................................22
Z
Zone Alarm Report Codes ...............................................33
Zone Alarm Restore Report Codes .................................34
Zone Definitions
24Hr. Burglary Zones ...................................................19
24Hr. Buzzer ...............................................................19
Entry Delay 1 ...............................................................18
Entry Delay 2 ...............................................................18
Follow Zones ...............................................................19
Instant Zones ..............................................................19
Zone Options
Alarm Types ................................................................20
Auto Zone Shutdown ....................................................20
Delay Before Alarm Report Code Transmission ...............21
Force Zones ................................................................21
Intellizone ...................................................................21
Keyswitch Options .......................................................21
Stay Zones .................................................................. 20
Zone Partition Assignment ..............................................20
Zone Programming ..........................................................16
Zone Programming, Wireless ..........................................22
Zone Restore Report Options .........................................38
Zone Speed .....................................................................22
Zone Tamper Report Codes ............................................34
Zone Tamper Restore Report Codes ..............................34
Zones Options
Bypass Zones .............................................................20