User's Manual
Table Of Contents
- Table of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 5: Zone Programming
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming On Battery Fail
- 7.5 Restrict Arming On Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm With Keypad
- 7.12 Bell Squawk On Arm/disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.3 Central Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Power Failure Report Delay
- 9.18 Disarm Reporting Options
- 9.19 Zone Restore Report Options
- 9.20 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 ReProgram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC WARNINGS
- Index
Follow Zones ...................................................................19
Force Arming ...................................................................49
Force Zones .................................................................... 21
G
Global PGM .....................................................................39
Ground ..............................................................................6
H
Hardware Reset ..............................................................41
I
Input Speed .....................................................................22
Installation .........................................................................6
Installer Code ..................................................................14
Installer Lock ...................................................................41
Installer Quick Functions Keys ........................................43
Installer Test Mode ..........................................................43
Instant Arming .................................................................49
Intellizone ........................................................................21
K
Key. See Memory Card
Keypad Audible Trouble Warning ....................................42
Keypad Backlight .............................................................51
Keypad Installation ............................................................ 9
Keypad Muting ................................................................51
Keypad Panic Options .....................................................30
Keypad Tamper Supervision ...........................................42
Keypad Zone Connection ..................................................9
Keyswitch Arming ............................................................50
Keyswitch Connections ...................................................10
Keyswitch Options ...........................................................21
Keyswitch Zone ...............................................................19
L
Length of Access Codes .................................................14
Location and Mounting ......................................................6
Lock Master Code ...........................................................15
Lock-out ...........................................................................41
M
Manual Bypass Programming .........................................49
Maximum Dialing Attempts ..............................................37
Memory Card ...................................................................13
Memory Display ...............................................................51
Modify Zone Numbering ..................................................17
Mounting ............................................................................6
Multiple Feature Select Programming Method ................11
Muting ..............................................................................51
N
No Arming On Battery Fail ..............................................27
No Arming on Supervision Loss ......................................44
No Arming On Tamper Trouble .......................................27
No Audible Feedback Upon Stay Arming ........................29
No Exit Delay When Arming with Remote Control ..........29
No Movement Auto-Arming .............................................28
Number of Rings .............................................................45
O
One-Touch Arming ....................................................28, 50
Options
Alarm ..........................................................................29
Arming and Disarming ..................................................27
Auto-Arming ................................................................28
Keyswitch ...................................................................21
User code ...................................................................14
Zone ...........................................................................20
Override Answering Machine ..........................................45
P
Pager Delay .....................................................................36
Pager Reporting Format ..................................................36
Panel Answer Options .....................................................45
Panel Identifier ................................................................45
Panic Alarms ...................................................................50
Panic Options ..................................................................30
Partition Account Numbers ..............................................35
Partition Assignment, Zone .............................................20
Partitioning ......................................................................41
PC Password ...................................................................45
PC Telephone Number ....................................................45
PGM (Control Panel)
Activation Event ...........................................................39
Deactivation Event .......................................................40
PGM Delay .................................................................40
Strobe Options ............................................................40
PGM Activation, User Code Option .................................15
Power ................................................................................6
Power Failure Report Delay ............................................ 38
Programmable Output Connections .................................. 8
Programmable Outputs ...................................................39
Programming Access Codes ...........................................48
Programming Chime Zones ............................................51
Programming Methods ....................................................11
Programming Using a Keypad ........................................11
Programming Wireless Zones .........................................22
Pulse Ratio ......................................................................37
Q
Quick Arming ...................................................................28
Quick Functions Keys (Installer) ......................................43
R
Real-Time Clock ..............................................................41
Reassign Zones to Expansion Inputs ..............................17
Recall Bypass ..................................................................50
Recent Close Delay .........................................................38
Recycle Alarm .................................................................29
Regular Arming ...............................................................48
Regular Arming Switches to Force Arming .....................27
Remote Controls
Assigning to 1759EX ....................................................25