User's Manual
Table Of Contents
- Table of Contents
- Part 1: Introduction
- Part 2: Installation
- Part 3: Programming Methods
- Part 5: Zone Programming
- Part 7: Arming and Disarming Options
- 7.1 Switch To Stay Arming
- 7.2 Stay Arming with Delay
- 7.3 Regular Arming switches to Force Arming (Not to be used with UL Installations)
- 7.4 Restrict Arming On Battery Fail
- 7.5 Restrict Arming On Tamper Failure
- 7.6 Timed Auto-Arming
- 7.7 No Movement Auto-Arming
- 7.8 Auto-Arming Options (Not to be used with UL installations)
- 7.9 One-Touch Arming (Not to be used with UL installations)
- 7.10 Exit Delay
- 7.11 Bell Squawk On Arm/Disarm With Keypad
- 7.12 Bell Squawk On Arm/disarm with Remote Control
- 7.13 No Exit Delay When Arming with Remote Control
- 7.14 No Exit Delay Beeps and No Bell Squawk When Stay Arming
- Part 8: Alarm Options
- Part 9: Reporting and Dialer settings
- 9.1 Reporting/Dialer (Enable/Disable)
- 9.2 Report Codes
- 9.3 Central Station Telephone Numbers
- 9.4 Partition Account Numbers
- 9.5 Reporting Formats
- 9.6 Pager Delay
- 9.7 Event Call Direction
- 9.8 Dialing Method
- 9.9 Pulse Ratio
- 9.10 Bell on Communication Failure
- 9.11 Dial Tone Delay
- 9.12 Maximum Dialing Attempts
- 9.13 Delay Between Dialing Attempts
- 9.14 Alternate Dial Option
- 9.15 Recent Close Delay
- 9.16 Auto Test Report
- 9.17 Power Failure Report Delay
- 9.18 Disarm Reporting Options
- 9.19 Zone Restore Report Options
- 9.20 Telephone Line Monitoring (TLM)
- Part 10: Programmable Outputs
- Part 11: System Settings
- 11.1 Hardware Reset
- 11.2 Installer Lock
- 11.3 Keypad Lockout Feature
- 11.4 Battery Charge Current
- 11.5 Partitioning
- 11.6 System Real-Time Clock
- 11.7 Clock Adjust
- 11.8 Keypad Tamper Supervision
- 11.9 Keypad Audible Trouble Warning
- 11.10 Confidential Mode
- 11.11 Installer Quick Functions Keys
- 11.12 PGM Modules Supervision
- 11.13 Printer Module Supervision
- 11.14 Zone Expansion Bus Module Supervision
- 11.15 Wireless Transmitter Low Battery Supervision
- 11.16 Wireless Transmitter Supervision Options
- 11.17 ReProgram All Expansion Modules
- Part 12: Settings for WinLoad Software
- Part 13: User Operation
- 13.1 Trouble Display
- 13.2 Programming Access Codes
- 13.3 Disarming & Deactivating an Alarm
- 13.4 Regular Arming
- 13.5 Stay Arming
- 13.6 Instant Arming
- 13.7 Force Arming (Not to be used with UL Installations)
- 13.8 Manual Bypass Programming
- 13.9 One-Touch Arming
- 13.10 Keyswitch Arming
- 13.11 Panic Alarms
- 13.12 Auto-Arming (Not to be used with UL installations)
- 13.13 Alarm Memory Display
- 13.14 Programming Chime Zones
- 13.15 Keypad Muting (Not to be used with UL installations)
- 13.16 Keypad Backlight (1686H and 1686V only)
- FCC WARNINGS
- Index
INDEX
Numerics
24Hr. Buzzer Zone ..........................................................19
24Hr. Delayed Fire Zone .................................................19
24Hr. Standard Fire Zone ................................................19
A
AC Power ..........................................................................6
Access Code Length .......................................................14
Access Code Programming .............................................48
Access Codes .................................................................14
Account Numbers ............................................................35
Ademco Contact ID .........................................................36
Ademco Contact ID Options ............................................36
Ademco Express .............................................................36
Adjust Clock ....................................................................41
Alarm Memory Display ....................................................51
Alarm Options ..................................................................29
Alarm Relay .......................................................................8
Alarm Relay Options .......................................................40
Alarm Report Code Transmission, Delay ........................21
Alarm Types ....................................................................20
Alternate Dial Option .......................................................38
Answer Upload/Download Software ................................43
Answer WinLoad Software ..............................................45
Answering Machine Override ..........................................45
Arming and Disarming Options .......................................27
Arming Report Codes ......................................................33
Auto Event Buffer Transmission ......................................46
Auto Force Arming ..........................................................27
Auto Test Report .............................................................38
Auto-Arming On No Movement .......................................28
Auto-Arming On Time ......................................................27
Auto-Arming Options .......................................................28
Auxiliary Power ..................................................................8
B
Backlight, Keypad ............................................................51
Backup Battery ..................................................................6
Battery Charge Current ...................................................41
Battery, Backup .................................................................6
Beep On Exit Delay .........................................................28
Beep On Trouble .............................................................42
Bell Cut-Off Timer ............................................................29
Bell on Communication Failure .......................................37
Bell Output Connection .....................................................8
Bell Squawk On Arm/Disarm With Keypad ......................29
Bell Squawk On Arm/disarm with Remote Control ..........29
Burglary Zones, 24 Hr. ....................................................19
Buzzer Zone ....................................................................19
Bypass Options, Supervision ..........................................44
Bypass Programming ......................................................49
Bypass Recall Feature ....................................................50
Bypass Zones ..................................................................20
C
Call Back Feature ............................................................46
Call Upload/Download Software ......................................43
Call WinLoad Software ....................................................45
Cancel Communication ...................................................43
Central Station Telephone Numbers ...............................35
Charge Current ................................................................41
Chime Zones ...................................................................51
Clock Adjust ....................................................................41
Configuring The LED Keypads ........................................12
Connecting
Bells or Sirens ............................................................... 8
Fire Zones ..................................................................10
Keypad Zones ...............................................................9
Keypads .......................................................................9
Keyswitches ................................................................10
PGMs ...........................................................................8
Single Zone Inputs .........................................................9
Telephone Lines ............................................................8
Contact ID Options ..........................................................36
Current Consumption Table ..............................................8
D
Data Display Mode ..........................................................11
Delay Before Alarm Report Code Transmission .............21
Delay Between Dialing Attempts .....................................38
Delay Power Failure Report ............................................38
Delay, Pager Report ........................................................36
Delayed Fire Zone ...........................................................19
Dial Tone Delay ............................................................... 37
Dialer settings ..................................................................32
Dialing Attempts ..............................................................37
Dialing Method ................................................................37
Disarm Reporting Options ...............................................38
Disarming ........................................................................48
Duress Code ...................................................................15
E
Entry Delay ......................................................................18
EOL Zones ......................................................................22
Event Buffer Transmission ..............................................46
Event Call Direction .........................................................37
Exclusive Zone Definitions
Delayed Fire Zone .......................................................19
Keyswitch Zone ...........................................................19
Standard 24Hr. Fire Zone .............................................19
Exit Delay ........................................................................28
Expansion Input ...............................................................16
Expansion Inputs Reassigned .........................................17
F
Feature Select Programming Method .............................11
Fire Circuits .....................................................................10
Fire Zone, Delayed ..........................................................19
Fire Zone, Standard 24 Hr. ..............................................19