- Paradox Keypad User Guide

12 EVO96
[DISARM] = Numeric Keys / Alphanumeric Keys
Every time the [
DISARM] key is pressed it will toggle from numeric keys to
alphanumeric keys and vice versa. Numeric: Keys [0] to [9] represent numbers 0
to 9.
[
BYP] = Lower Case / Upper Case
Every time the [
BYP] key is pressed it will toggle the case setting from lower to
upper case and vice versa.
[
MEM] = Special Characters
After pressing the [
MEM] key, the cursor will turn into a flashing black square. Using
Table 5 on page 12, enter the 3-digit number that represents the desired symbol. If
using a Hebrew keypad, refer to Table 7 in Appendix 1: Hebrew Special Characters
on page 27. If using a Russian keypad, refer to Table 10 in Appendix 2: Russian
Special Characters on page 28. If using a Greek keypad, refer to Table 12 in
Appendix 3: Greek Special Characters on page 29.
Table 5: Special Characters Catalogue
6.5 Deleting User Access Codes
To delete user access codes, follow steps 1 to 5 in section 6.6.1 on page 13 or section
6.6.2 on page 14, but press the [
CLEAR] button or the [] key in Step 5. Once the
information is erased, press the [ENTER] button to save and exit.
6.6 Programming User Access Codes
The System Master and Users with the Master feature can program user access codes
with User Options and Area Assignments. The section 6.6.1 on page 13 describes the
steps you would follow to program user access codes. If you wish to program user access
codes using the NEware Software, please contact your installer for information.
LCD ICON LED
LCD ICON LED