Installation Manual

PE Smart Mini Gateway
Document No. [DOC-INS-0115-05] Date of last revision [31.05.2021]
Page 7 / 50
3. Warnings for Installers and Users
The following instructions provide important precautions to safely install, use and maintain the product.
Please read and follow them carefully before operating the unit: failure to comply may compromise
people safety and/or damage the device, with serious consequences depending on circumstances.
Table 2 – Symbols Used in this Document
Symbol
Description
Warning: failure to follow these instructions properly may result in personal
injury and/or product damage, which may be serious depending on the
circumstances
Important notice: be sure to follow the instructions
Table 3 – Warnings
List of warnings
The equipment is intended for installation, service and repair by trained and skilled personnel
only (no operator access)
Install the product in accordance with the instructions provided in this installation manual
The manufacturer shall not be held liable for errors or damages due to wrong mounting
operations
The product is intended to be used even in countries having IT type electricity supply systems
This equipment is intended to be used with elevations up to 2000 m
The product and the various units comprising the installation must only be used for the
purpose for which they are intended. Any other use is considered improper and dangerous
Unpack the product and check possible damages before installing and operating it
Electrical work and installation must be performed in accordance with relevant local and
national regulations, following the instructions provided in this installation manual.
Before connecting the product, make sure that product voltage ratings correspond to the mains
power supply voltage
Ensure that an appropriate disconnect device shall be incorporated in the electrical installation
of the building.
Cover all unused connectors with the provided plugs to safeguard product IP rating