Installation Manual

PE Smart Mini Gateway
Document No. [DOC-INS-0115-05] Date of last revision [31.05.2021]
Page 25 / 50
After executing those steps, you need to use your laptop to connect to the internal webserver of the Mini
Gateway. This can be accomplished by either joining the internal Wi-Fi access point of the Mini Gateway
or using an Ethernet cable to connect directly to the Ethernet 0 port. Refer to Figure 5, above to see the
location of Ethernet 0.
NOTE: In order to use this option, you need a laptop computer
to join the Wi-Fi access point of the Mini Gateway, the SSID is
“PE-hotspot” and the password is “h0tst0PE”.
You now are able to login to the internal website of the Mini Gateway. To login, use your web browser to
navigate to the following URL:
hiip://192.168.1.10
NOTE: The default login is “admin” and the password is
“pwd_gwadmin_demo”.