Installation Manual

PE Smart Mini Gateway
Document No. [DOC-INS-0115-05] Date of last revision [31.05.2021]
Page 16 / 50
5.6 Connecting an Ethernet Cable – Step 3: Squeeze the Cable Through Part C
After you have threaded the Ethernet cable through Parts A and B, push the cable through the top of Part
C to insert the cable. Part C will separate and re-close as shown in Figures 8 and 9.
Figure 8. Connecting an Ethernet Cable to the PE Smart Mini Gateway
Press the cable on the top
of Part C to squeeze the
cable inside