Installation Manual

PE Smart Gateway Neptune US
Installation manual
Document No. [DOC-INS-0059-02] Date of last revision [23.11.2018]
Page 4 / 30
Warnings for installers and users
The following instructions provide important precautions to safely install, use and maintain the product.
Please read and follow them carefully before operating the unit: failure to comply may compromise people safety
and/or damage the device, with serious consequences depending on circumstances.
List of symbols used in this document
Symbol
Description
Warning: failure to follow these instructions properly may result in personal injury
and/or product damage, which may be serious depending on the circumstances
Grounding instruction: be sure to establish an earth connection
Important notice: be sure to follow the instruction
List of warnings
The equipment is a Class I appliance and fits outdoor installations
The equipment is intended for installation, service and repair by trained and skilled personnel only (no
operator access)
Install the product in accordance with the instructions provided in this installation manual
Paradox Engineering is not responsible for errors or damages due to wrong mounting operations
The product is intended to be used even in countries having IT type electricity supply systems
This equipment is intended to be used with elevations up to 2,000 mt
The product and the various units comprising the installation must only be used for the purpose for which
they are intended. Any other use is considered improper and dangerous
Unpack the product and check possible damages before installing and operating it
Electrical work and installation must be performed in accordance with relevant local and national
regulations, following the instructions provided in this installation manual. Refer to chapter 9 Certification
for further details
Before connecting the product, make sure that product voltage ratings correspond to the mains power
supply voltage
This equipment must be grounded. If the cable strand is not grounded, please ground the product by
connecting a customer supplied ground wire to the grounding lug on the chassis, then fixing the other end
to a reliable earth ground. If you are uncertain about the availability of suitable grounding, contact local
electrical inspection authority or a skilled electrician. Refer to par. 4.1 Grounding instructions
Connecting the supplemental ground to the unit in accordance with the NESC is essential before
connecting input supply cable
Cover all unused connectors with the provided plugs to safeguard product IP rating
Mount all antennas before powering the product
Before cleaning or servicing the product, disconnect it from the mains power