Installation Manual

PE Smart Gateway Neptune US
Installation manual
Document No. [DOC-INS-0059-02] Date of last revision [23.11.2018]
Page 20 / 30
If CMS’ IP is different from default setting, please modify it accordingly in the AMI Settings section of GW Manager by
changing the “ServerAddr” IP.
Please ensure to correctly configure your network firewall to allow bidirectional communication over the TCP port
range.
5.3 Gateway to PE
PE Smart Gateway Neptune US will attempt to establish a VPN link to Paradox Engineering network through TCP port
21194. This link will be used for remote support purposes only.
Allowing this port in your network firewall is not mandatory, but warmly recommended to have a prompt and efficient
remote support from Paradox Engineering.