Universal Remote User Manual

RCP2-1000 RM Remote Controller Operations Manual 203987 Rev A 7
1.0 Introduction
This section provides the general information for the Paradise Datacom LLC
Redundant Control Panel for Rack Mount SSPAs. This section describes the supplied
equipment and safety precautions.
1.1 Description
The RCP2-1000 RM controller provides control of Paradise Datacom’s Rack Mount
Solid State Power Amplifiers. The RCP2-1000 RM is used for standalone or 1:1 modes
of operation. An outline drawing of the RCP2-1000 is shown in Figure 1-1.
A mimic display on the front panel indicates online and fault status of the equipment.
User interface and control is provided in three forms:
• Front Panel, Local Control
• 37-pin Parallel Control Port with Contact Closures and Opto Isolated Inputs
• Serial Data Control via RS-232 or RS-485 (2-wire)
Section 1: General Information
DATACOM PARADISE
RCP2-1000
SSPA REMOTE
CONTROLLER
J7 PARALLEL I/O
J5 SERIAL LOCALJ4 SERIAL MAIN
J6 PROGRAM
J9 ETHERNET
J1
PS1
Figure 1-1: Outline drawing, RCP2-1000-RM