Operation Manual

About Paradigm Virtual Surround?

Typically in a 2.1 system, all the audio magic of Dolby Digital or DTS Digital

surround information is lost, since there are no surround speakers to deliver

it. This precious information sits in the front left and right speaker channels

wondering what to do with itself.

Using sophisticated mathematical algorithms, Paradigm Virtual Surround

processing gathers that neglected surround information in a central sweet spot

then reows it into the front left and right channels. It’s then sent out into the

room in a way that creates the auditory illusion of sound enveloping the listeners

on all sides. An ‘illusion’ perhaps, but to our ears, designed to hear in three

dimensions, this spacious, ambient sound that swirls around us is very real.

IR Learning

Enabling IR Learning on Millenia CT 2

1. To enable IR Learning on Millenia CT 2, press and hold the ‘MUTE’ button

for 5 seconds on either the remote control or the control box. The LED

on the front of the control box will glow a brighter ‘BLUE’. This indicates

Millenia CT 2 is now in IR Learning Mode.

2. Using either the remote control or the control box press the command you

would like Millenia CT 2 to learn.

For example: If you want the Millenia CT 2 to learn the ‘VOLUME +’

command, press ‘VOLUME +’. The LED on the front of the Control Box will

ash ‘BLUE’ slowly, this indicates that the Millenia CT 2 is in the process of

learning a command.

3. Press the corresponding button on the 2nd remote control to learn the

command.