Owner's Manual

4
PLACEMENT
Accurate Timbre
For the most accurate and natural timbre, position speaker so that sound from the high-frequency
drivers reaches the listener at approximately ear level. Keep in mind, your speaker will allow for
higher than usual placement of the high-frequency drivers, a particularly important feature when
wall mounting.
CONNECTION
Make sure to turn your amplifier off before making or breaking any signal connections! Millenia
LP Trio is designed with easy-to-use push-style binding posts that accept bare wire or pins. Assign
the same colour to the (+) and (-) terminals on both the speaker and the amplifier. Make certain
that all connections are tight.
MINIMUM GAUGE REQUIREMENTS
LENGTH DIAMETER GAUGE
Under 4.5 m (15 ft) 1.3 mm (0.05 in) 16 awg
Under 9 m (30 ft) 1.6 mm (0.06 in) 14 awg
Over 9 m (30 ft) 2.0 mm (0.08 in) 12 awg
The following chart identifies the minimum gauge requirements for various cable lengths: