Service Manual

Preface
2
MMR2 Installation and Service Manual Ver 1
How to Use this Guide
This guide provides concise, step-by-step instructions for set-up, configuration, and operation of the
ACS-1E and ACS-1EUL systems.
Conventions Used in this Guide
This guide contains the following conventions:
Warnings, Cautions, and Notes are used to draw immediate attention to matters of importance. The
following is a definition of their meanings:
WARNING: INDICATES A POTENTIALLY HAZARDOUS SITUATION THAT, IF NOT AVOIDED, COULD RESULT IN
SERIOUS INJURY.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in data loss or product
damage.
Note: Indicates additional information.
Convention Example
Screen names, dialog box names, tab names,
window names, field names, and menu names
appear in bold font.
Click the Customer box.
File names are italicized. AxsView.Transceiver.Installer.msi
Steps to be performed in order are numbered
and/or lettered.
1. Click Save and Close to save the information
before closing the dialog box, or click Can-
cel to close the dialog box without saving
the information.
2. From the Login screen, click Setup, and then
click Login.
Unordered steps are presented in bullets.
Microsoft
Windows
7 or greater
Microsoft
Net 3.5 and .Net 3.51
Checkboxes
To select (enable) a checkbox setting, click
in the checkbox. The checkbox has a check
mark.
To clear (disable) a checkbox setting, click
on the check mark in the checkbox. The
checkbox is empty.
Series of menu options to click Click Options > User Management > Add New