Manual

Figure 2

SLIDE LOCK

SAFETY

(ENGAGED)

To engage the Slide Lock Safety push the Slide Lock Safety up

until it fully engages the Slide Lock Notch

(Figure 2). At this

point, the slide is prevented from moving rearward. If the

cocking cam has been cocked and the trigger re-set, engaging

the slide lock safety will disengage the drawbar to prevent the

hammer from moving rearward if the trigger is pressed.

NEVER LEAVE YOUR PISTOL LOADED

AND READY TO FIRE.

THIS IS AN EXTREMELY DANGEROUS

CONDITION WHICH CAN LEAD TO AN

ACCIDENTAL DISCHARGE THAT MAY CAUSE INJURY,

DEATH, OR PROPERTY DAMAGE.

Figure 3

GRIP

SAFETY

(ACTIVE, IN

THE OUT

POSITION)

HAMMER

AND

SLIDE

LOCKED

GRIP SAFETY

The Grip Safety (Figure 3) locks both the hammer and slide.

In order to press the trigger and move the hammer, which is

necessary to fire the pistol, you must firmly grasp the pistol’s

receiver, fully depressing the Grip Safety. When you are ready to

fire the pistol, the forward pressure of your hand on the Grip

Safety disengages this safety device and allows the hammer the

necessary freedom for its rearward movement required to fire the

pistol when the trigger is pressed.

NEVER COMPROMISE SAFETY. NEVER ALTER

OR MODIFY THIS PISTOL IN ANY WAY.

THE MANUFACTURER WILL NOT

BE RESPONSIBLE FOR ANY

UNAUTHORIZED MODIFICATIONS

PERFORMED ON THIS GUN.