Manual

CLEANING HIGH-CAPACITY MAGAZINE
This should be done whenever cleaning the pistol.
Slide magazine floor plate toward the front of the magazine,
taking care to avoid forcible ejection of the magazine spring
from the body. With the floor plate out of the way, remove
the spring and follower. Clean all components, taking care
to remove any powder deposits on the magazine retaining
lips and follower (Figure 27).
NOTE: Place spring correctly oriented with closed loop
uppermost pointing forward.
36
ALWAYS PASS A DRY PATCH THROUGH THE
BARREL TO REMOVE AS MUCH OIL AS POSSIBLE
PRIOR TO USING PISTOL. FIRING THE PISTOL
WITH OIL, GREASE OR ANY OTHER MATERIAL
EVEN PARTIALLY OBSTRUCTING THE BORE MAY
RESULT IN DAMAGE TO THE PISTOL WHICH CAN
CAUSE INJURY, DEATH, OR PROPERTY DAMAGE.
BEFORE PROCEEDING MAKE SURE YOU ARE
WEARING SAFETY GLASSES AND KEEP THE
MAGAZINE POINTED AWAY FROM YOUR FACE.