Manual

35
STEP 7. Replace the front
section of the recoil guide
through the center of the
plug, and using the hex
wrench, screw the front
section firmly in place
(Figure 26).
Figure 26
5/32" HEX
WRENCH
CLEANING P
ISTOL
1. Disassemble (field-strip) the pistol to the extent
described on pages 22 through 32.
2. Clean your pistol by brushing the barrel bore and cham-
ber with a good powder-removing solvent and bore
brush. Wipe the areas clean with patches or a swab.
3. Using a small brush dipped in solvent, remove all
deposits from around the breech of the barrel, chamber,
extractor and adjacent areas which have been subjected
to powder residue. Wipe all surfaces clean with patch or
swab.
4. After cleaning the entire pistol, use a cloth to apply a
light coating of high quality gun oil by passing it once
through the barrel and all other surfaces.
NOTE: Excess accumulations of oil can interfere with the
safe and reliable function of the pistol.