Manual

Figure 25
DISASSEMBLY
NOTCH
SLIDE
STOP PIN
34
STEP 6. Align the hole in the
barrel link with the slide
stop pin hole. Insert the slide
stop pin partially through
the receiver. Then grip
the
frame with one hand and the
slide with the other. Now
push the slide rearward to
properly align the disassem-
bly notch. Snap the slide stop
pin into place by pressing up
and against the slide stop
detent (Figure 24).
An alternate method of grip-
ping the frame and the slide
with one hand to align the
disassembly notch and insert
the slide stop pin with the
other hand is shown below
(Figure 25).
Figure 24
SLIDE
STOP