Manual

32
STEP 6. Lift the rear of the recoil
spring and guide, then remove
towards rear of slide. Push front
of recoil plug towards rear of
slide, and remove (Figure 22).
STEP 7. To remove the barrel
bushing, turn the bushing
counter-clockwise as far as it
will go and pull it forward, and
out of the slide and off the barrel.
STEP 8. With barrel bushing removed, rotate barrel link
forward and remove the barrel through the front of the slide.
If your pistol requires further work it should be done at an
Authorized Service Center or at the factory.
DO NOT DISASSEMBLE YOUR PISTOL ANY FURTHER.
DO NOT REMOVE OR ALTER ANY PARTS,
ESPECIALLY SAFETY PARTS.
STEP 5. Wrap hand around slide at
recoil area to control recoil spring.
Push slide forward and remove
slide from receiver (Figure 21).
Figure 21
Figure 22
BEFORE PROCEEDING MAKE
SURE YOU ARE WEARING
SAFETY GLASSES AND
KEEP THE MUZZLE OF
THE PISTOL POINTED
AWAY FROM YOUR FACE.