Manual

29
Figure 15
Now, place your
bushing wrench
over the bushing
and, while pressing
the wrench down
firmly to hold the
plug down, rotate
the bushing
counter-clockwise
until the plug can
snap into place
(Figure 15).
P14•45/P13•45/P12•45/P18•9 and P12•45 Limited ONLY
SIGHT
ADJUSTMENT
The rear sight is adjustable for
windage only. Using a 5/64"
hex wrench which has been
provided, loosen the hex set
screw located directly in front
of the rear sight notch. You
may now change windage by
moving the rear sight either
left or right in its dovetail.
Remember, always move your
rear sight in the direction you
want your bullet’s impact to go.
BARREL
BUSHING
WRENCH
BARREL
BUSHING
RECOIL
SPRING
PLUG
Figure 16